Turris Build issueshttps://gitlab.nic.cz/turris/os/build/-/issues2024-03-25T23:04:50+01:00https://gitlab.nic.cz/turris/os/build/-/issues/434Enhance Your Domino Mastery with Alat Mitra in Higgs Domino: Your Ultimate Co...2024-03-25T23:04:50+01:00aniaquen232Enhance Your Domino Mastery with Alat Mitra in Higgs Domino: Your Ultimate Companion for Domino SuccessUnlock the full potential of your domino prowess with [Alat Mitra in Higgs Domino](https://apkhiggsdomino.com/mitra-higgs-domino/). This indispensable tool is your key to mastering the intricate strategies and tactics of domino gameplay....Unlock the full potential of your domino prowess with [Alat Mitra in Higgs Domino](https://apkhiggsdomino.com/mitra-higgs-domino/). This indispensable tool is your key to mastering the intricate strategies and tactics of domino gameplay. With Alat Mitra by your side, you can fine-tune your skills, analyze game patterns, and strategize your way to victory with precision and confidence. Whether you're a novice looking to improve or a seasoned player seeking an edge, Alat Mitra provides invaluable support and resources to help you succeed. From enhancing your understanding of game mechanics to optimizing your gameplay strategy, Alat Mitra is the ultimate companion for every domino enthusiast. Download Alat Mitra now and elevate your domino experience to new heights in Higgs Domino.
![ezgif.com-webp-to-jpg-converter__3_](/uploads/07dc1265dd10b7cc84e13f1cfa6f2bcf/ezgif.com-webp-to-jpg-converter__3_.jpg)https://gitlab.nic.cz/turris/os/build/-/issues/327Rescue mode can't read the medkit with a space in the name2024-03-12T14:01:26+01:00Aleksandr GumroianRescue mode can't read the medkit with a space in the nameI'm not sure where this issue should be placed, but I've encountered an issue during the "Re-flash router from flash drive".
As soon as you have a medkit, which name includes a space in the name, the rescue mode on my Omnia can't recogn...I'm not sure where this issue should be placed, but I've encountered an issue during the "Re-flash router from flash drive".
As soon as you have a medkit, which name includes a space in the name, the rescue mode on my Omnia can't recognize it.
For example, when I download medkits from different branches (HBL/HBS, etc.) from the [repo](https://repo.turris.cz), they have the very same name `omnia-medkit-latest.tar.gz` but my OS will add a suffix to the name `omnia-medkit-latest (1).tar.gz` in case the file was already downloaded earlier.
![image](/uploads/981b29c51a9d7908e8c9ece3872d8fa7/image.png)
From my terminal with a connected device, I see that the rescue mode is waiting for `omnia-medkit-*` on USB, but can't see the medkit with ` (1)` and it's not obvious.
I hope it does make sense, thanks!Michal HruseckyMichal Hruseckyhttps://gitlab.nic.cz/turris/os/build/-/issues/408Respects Your Freedom Certification for Turris 1.x routers2024-03-12T13:57:46+01:00Josef SchlehoferRespects Your Freedom Certification for Turris 1.x routersThere were several attempts to reach people behind [FSF](https://ryf.fsf.org/), but it seems that it was not finished or we was not able to reach them. I tried to ask several times in our company if there is something new, but I have not...There were several attempts to reach people behind [FSF](https://ryf.fsf.org/), but it seems that it was not finished or we was not able to reach them. I tried to ask several times in our company if there is something new, but I have not received any response.
Consider to get Respects Your Freedom Certification for Turris 1.x routers.https://gitlab.nic.cz/turris/os/build/-/issues/409Provide SDK2024-03-12T13:56:35+01:00Patrick GrimmProvide SDKWhy don't provide the SDK? It is easier to develop and distribute third party opkg feeds.
```
diff --git a/configs/common/basic_settings b/configs/common/basic_settings
index 08c99f23..3be3d260 100644
--- a/configs/common/basic_settings...Why don't provide the SDK? It is easier to develop and distribute third party opkg feeds.
```
diff --git a/configs/common/basic_settings b/configs/common/basic_settings
index 08c99f23..3be3d260 100644
--- a/configs/common/basic_settings
+++ b/configs/common/basic_settings
@@ -7,6 +7,9 @@ CONFIG_BUILD_NLS=y
CONFIG_ALL_KMODS=y
CONFIG_ALL=y
+# Build openwrt SDK pre-compiled toolchain designed to cross compile packages
+CONFIG_SDK=y
+
# Package output options
CONFIG_SIGNED_PACKAGES=y
CONFIG_IPK_FILES_CHECKSUMS=y
```https://gitlab.nic.cz/turris/os/build/-/issues/392VLAN leak with bridge VLAN filtering on MOX running TOS 6.0.42024-03-12T13:53:00+01:00Ondřej CaletkaVLAN leak with bridge VLAN filtering on MOX running TOS 6.0.4Possibly related to #355.
In my setup, Turris Mox have all interfaces in a bridge and VLAN filtering is used to setup different roles for different ports. In this output of `bridge vlan` command, port `lan1` has only one allowed VLAN nu...Possibly related to #355.
In my setup, Turris Mox have all interfaces in a bridge and VLAN filtering is used to setup different roles for different ports. In this output of `bridge vlan` command, port `lan1` has only one allowed VLAN number 60 that is also PVID. This port is used as an access port for computers.
```
# bridge vlan
port vlan-id
eth0 20 PVID Egress Untagged
21
60
lan1 60 PVID Egress Untagged
lan2 62 PVID Egress Untagged
lan3 20 PVID Egress Untagged
21
60
lan4 22 PVID Egress Untagged
br-guest_turris 1 PVID Egress Untagged
br-lan 20
21
22
60
62
wlan1 22 PVID Egress Untagged
wlan0 22 PVID Egress Untagged
wlan0-1 62 PVID Egress Untagged
```
Despite this setup, I can see some tagged frames with VLAN tag 20 or 22 leaking into the lan1 port. Only multicast traffic leaks like this. This is especially harmful for Windows, since that OS mostly ignores 802.1q header and receive data from all VLANs, breaking IPv6 configuration every time a RA is sent into some of the other VLANs.https://gitlab.nic.cz/turris/os/build/-/issues/433[kernel 5.15.151-1-cfaf0eaef6d040cba91b2530b83dd2ac][TOS 7.0.0][HBK] Boot loo...2024-03-12T13:33:11+01:00Sviatoslav Sydorenko[kernel 5.15.151-1-cfaf0eaef6d040cba91b2530b83dd2ac][TOS 7.0.0][HBK] Boot loop after the yesterday's kernel module autoupdates$sbj. I posted my observations in this forum topic https://forum.turris.cz/t/turris-os-7-0-is-in-rc/19755/63?u=webknjaz. But TL;DR there seems to be a kernel stack trace soon after boot which is followed by a reboot.
Is this related to ...$sbj. I posted my observations in this forum topic https://forum.turris.cz/t/turris-os-7-0-is-in-rc/19755/63?u=webknjaz. But TL;DR there seems to be a kernel stack trace soon after boot which is followed by a reboot.
Is this related to !700? Reverting to 5.15.148 makes Omnia functional again.https://gitlab.nic.cz/turris/os/build/-/issues/355VLAN filtering broken in kernel 5.15.x (hbl)2024-03-11T22:25:48+01:00Ondřej CaletkaVLAN filtering broken in kernel 5.15.x (hbl)In my setup, Mox acts both as a router for some vlans as well as a switch for others. I put all ports including eth0 into one bridge and use vlan filtering.
```
config device
option name 'br-lan'
option type 'bridge'
...In my setup, Mox acts both as a router for some vlans as well as a switch for others. I put all ports including eth0 into one bridge and use vlan filtering.
```
config device
option name 'br-lan'
option type 'bridge'
option bridge_empty '1'
option force_link '1'
list ports 'lan1'
list ports 'lan2'
list ports 'lan3'
list ports 'lan4'
list ports 'eth0'
config bridge-vlan
option device 'br-lan'
option vlan '22'
list ports 'lan3'
list ports 'lan4'
config bridge-vlan
option device 'br-lan'
option vlan '60'
list ports 'eth0:t'
list ports 'lan1'
config bridge-vlan
option device 'br-lan'
option vlan '62'
list ports 'lan2'
config bridge-vlan
option device 'br-lan'
option vlan '20'
list ports 'eth0'
config bridge-vlan
option device 'br-lan'
option vlan '21'
list ports 'eth0:t'
config interface 'wan'
option device 'br-lan.20'
…
config interface 'lan'
option device 'br-lan.22'
…
```
```
# bridge vlan show
port vlan-id
eth0 20 PVID Egress Untagged
21
60
lan1 60 PVID Egress Untagged
lan2 62 PVID Egress Untagged
lan3 22 PVID Egress Untagged
lan4 22 PVID Egress Untagged
br-lan 20
21
22
60
62
wlan0 22 PVID Egress Untagged
wlan0-1 62 PVID Egress Untagged
# uname -r
5.4.203
```
After upgrade to kernel 5.15.50 in HBL, I am having troubles with VLAN 60, that just traverses tagged on `eth0` and untagged on `lan1` port. The ingress traffic on `lan1` gets tagged and delivered to `eth0` but in egress direction, the tag is not stripped when leaving `lan1` interface despite `bridge vlan show` showing `Egress Untagged`. There are no problems with other VLANs which don't traverse between ethernet ports. Alo if I use different LAN port in place of eth0 for uplink, problem is gone.https://gitlab.nic.cz/turris/os/build/-/issues/315OpenVPN 2.4 and OpenVPN 2.5 incompatibility2024-03-11T10:15:41+01:00Josef SchlehoferOpenVPN 2.4 and OpenVPN 2.5 incompatibilityI generated user client configuration on OpenVPN 2.4 (HBK) in reForis and now, I tried to use it on OpenVPN 2.5 server using OpenWrt daily snapshots and it seems that it does not work.
Output:
```
Dec 27 11:26:49 turris openvpn(xxx)[135...I generated user client configuration on OpenVPN 2.4 (HBK) in reForis and now, I tried to use it on OpenVPN 2.5 server using OpenWrt daily snapshots and it seems that it does not work.
Output:
```
Dec 27 11:26:49 turris openvpn(xxx)[13564]: --cipher is not set. Previous OpenVPN version defaulted to BF-CBC as fallback when cipher negotiation failed in this case. If you need this fallback please add '--da.
Dec 27 11:26:49 turris openvpn(xxx)[13564]: OpenVPN 2.5.5 aarch64-openwrt-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD]
Dec 27 11:26:49 turris openvpn(xxx)[13564]: library versions: OpenSSL 1.1.1l 24 Aug 2021, LZO 2.10
Dec 27 11:26:49 turris openvpn(xxx)[13564]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Dec 27 11:26:49 turris openvpn(xxx)[13564]: OpenSSL: error:0909006C:PEM routines:get_name:no start line
Dec 27 11:26:49 turris openvpn(xxx)[13564]: OpenSSL: error:140AD009:SSL routines:SSL_CTX_use_certificate_file:PEM lib
Dec 27 11:26:49 turris openvpn(xxx)[13564]: Cannot load inline certificate file
Dec 27 11:26:49 turris openvpn(xxx)[13564]: Exiting due to fatal error
```Turris OS 7.0https://gitlab.nic.cz/turris/os/build/-/issues/161[meta] Better IPv6 detection2024-03-11T09:33:49+01:00Jan Pavlinec[meta] Better IPv6 detectionThis issue should be used for brainstorming ideas about IPv6 detection.
The main idea is, that there should be one mechanism that can tell if the user has IPv6 and this information should be shared with init scripts (via uci for example...This issue should be used for brainstorming ideas about IPv6 detection.
The main idea is, that there should be one mechanism that can tell if the user has IPv6 and this information should be shared with init scripts (via uci for example) instead of doing separate detection for every service.
Examples of with detection:
* knot-resolver ping test for disabling IPv6: [turris-os-packages:net/knot-resolver/files/kresd.init#L270](https://gitlab.nic.cz/turris/turris-os-packages/-/blob/v5.1.0/net/knot-resolver/files/kresd.init#L270)
* hotplug - https://gitlab.nic.cz/turris/turris-os-packages/-/merge_requests/381/diffs#diff-content-160a8a7b73e11a0e3502870d06ac486732a69d98
cc @jschlehofer @kkoci @mhruseckyTurris OS 7.1.0https://gitlab.nic.cz/turris/os/build/-/issues/151SDIO card does not support WPA-Enterprise (WPA-802.1X mode)2024-03-11T09:32:17+01:00Josef SchlehoferSDIO card does not support WPA-Enterprise (WPA-802.1X mode)On our forum, there was reported that Enterprise Wi-Fi does not work on the MOX SDIO Wi-Fi card, which is using Marvell 88W8997.
More details about that can be found https://forum.turris.cz/t/enterprise-wi-fi-does-not-work-with-mox-sdio...On our forum, there was reported that Enterprise Wi-Fi does not work on the MOX SDIO Wi-Fi card, which is using Marvell 88W8997.
More details about that can be found https://forum.turris.cz/t/enterprise-wi-fi-does-not-work-with-mox-sdio-wi-fi/10494
We didn't say anywhere that the Wi-Fi card has support for WPA-802.1X mode and we didn't advertise it anyhow.Michal HruseckyMichal Hruseckyhttps://gitlab.nic.cz/turris/os/build/-/issues/427PPtP VPN seems broken2024-03-04T14:05:24+01:00Michal HruseckyPPtP VPN seems brokenhttps://forum.turris.cz/t/turris-os-7-0-is-in-rc/19755/20https://forum.turris.cz/t/turris-os-7-0-is-in-rc/19755/20Turris OS 7.0https://gitlab.nic.cz/turris/os/build/-/issues/396Is it still necessary to haveged?2024-03-04T10:13:00+01:00Giuseppe PiscitelliIs it still necessary to haveged?In March 2022 Jason A. Donenfeld published this paper https://www.zx2c4.com/projects/linux-rng-5.17-5.18. The changes are also in the latest version of the kernel in TurrisOS 6.1.0 (linux-5.15.84). Is it still necessary to haveged preins...In March 2022 Jason A. Donenfeld published this paper https://www.zx2c4.com/projects/linux-rng-5.17-5.18. The changes are also in the latest version of the kernel in TurrisOS 6.1.0 (linux-5.15.84). Is it still necessary to haveged preinstalled and activated?Turris OS 7.1.0https://gitlab.nic.cz/turris/os/build/-/issues/431SDIO WiFi crashing kernel on Turris OS 7.02024-03-04T10:12:33+01:00Michal HruseckySDIO WiFi crashing kernel on Turris OS 7.0We have a report of SDIO WiFi crashing the kernel on Turris OS 7.0, we need to investigate. Firstly, try to repoproduce it, but updating driver to a newer version might be a good idea as well and might be enough.
https://forum.turris.cz...We have a report of SDIO WiFi crashing the kernel on Turris OS 7.0, we need to investigate. Firstly, try to repoproduce it, but updating driver to a newer version might be a good idea as well and might be enough.
https://forum.turris.cz/t/turris-os-7-0-is-in-rc/19755/12Turris OS 7.0https://gitlab.nic.cz/turris/os/build/-/issues/429Firewall status in LuCI is empty2024-03-04T10:12:20+01:00Michal HruseckyFirewall status in LuCI is emptyAs reported on our forum, firewall statu in LuCI might be empty. This might be some mixup between iptables and nftables firewall, we need to check, but we need to reproduce first.
https://forum.turris.cz/t/turris-os-7-0-is-in-rc/19755/27As reported on our forum, firewall statu in LuCI might be empty. This might be some mixup between iptables and nftables firewall, we need to check, but we need to reproduce first.
https://forum.turris.cz/t/turris-os-7-0-is-in-rc/19755/27Turris OS 7.0Michal HruseckyMichal Hruseckyhttps://gitlab.nic.cz/turris/os/build/-/issues/178Enable GCC_DEFAULT_SSP2024-03-01T14:34:28+01:00Jan PavlinecEnable GCC_DEFAULT_SSPWe should enabled GCC_DEFAULT_SSP by default on HBL
https://gitlab.nic.cz/turris/turris-build/-/commit/25d12eb1a8ceb5e1fcbfcc1473b9610f7e9d5314
This issue is a sort of reminder.We should enabled GCC_DEFAULT_SSP by default on HBL
https://gitlab.nic.cz/turris/turris-build/-/commit/25d12eb1a8ceb5e1fcbfcc1473b9610f7e9d5314
This issue is a sort of reminder.Turris OS 7.1.0https://gitlab.nic.cz/turris/os/build/-/issues/426[TOS 7.x] ssh-copy-id not working when I want to deploy my keys to turris2024-02-21T15:57:51+01:00Štěpán Henek[TOS 7.x] ssh-copy-id not working when I want to deploy my keys to turrisThe key is appended to `/etc/dropbear/authorized_keys` instead of `/root/.ssh/authorized_keys`.
We are not using dropbear on turris, so it is not possible to log in using the key afterwards.The key is appended to `/etc/dropbear/authorized_keys` instead of `/root/.ssh/authorized_keys`.
We are not using dropbear on turris, so it is not possible to log in using the key afterwards.https://gitlab.nic.cz/turris/os/build/-/issues/342new_release.sh helper considers -v option as illegal2024-02-21T15:43:54+01:00Simon Boreknew_release.sh helper considers -v option as illegal## From new_release.sh help:
```
Usage: ./helpers/new_release.sh [OPTION].. [MODE [BRANCH]]
Turris OS new releases managing tool.
Options:
-v Run script with verbose output
-h Print this help text
Modes:
verify
Run script in...## From new_release.sh help:
```
Usage: ./helpers/new_release.sh [OPTION].. [MODE [BRANCH]]
Turris OS new releases managing tool.
Options:
-v Run script with verbose output
-h Print this help text
Modes:
verify
Run script in verify mode where BRANCH (in default hbk) is checked
for possible release problems. This is default.
...
```
## Expected behaviour:
`./helpers/new_release.sh -v verify` or `./helpers/new_release.sh -v` runs the script in "verify" mode with verbose output.
## Actual behaviour:
The script writes `Illegal option '-v'` to stdout and exits with code 1.
Happens in all branches.https://gitlab.nic.cz/turris/os/build/-/issues/346Enable DBDC for ath9k2024-02-21T15:42:38+01:00Josef SchlehoferEnable DBDC for ath9k@prohar found out that cards using ath9k should be able to use DBDC.
It is necessary to enable ``CONFIG_ATH9K_CHANNEL_CONTEXT`` and add this parameter to kernel: ``ath9k.ath9k_use_chanctx=1``@prohar found out that cards using ath9k should be able to use DBDC.
It is necessary to enable ``CONFIG_ATH9K_CHANNEL_CONTEXT`` and add this parameter to kernel: ``ath9k.ath9k_use_chanctx=1``Turris OS 7.1.0https://gitlab.nic.cz/turris/os/build/-/issues/3992.5 GBps mode not being advertised/recognized2024-01-23T21:00:44+01:00Elias Policena2.5 GBps mode not being advertised/recognizedHi there!
I bought ODI DFP-34X-2C2 module and managed it to work in my Turris Omnia (RTROM01-CE, SN 60129549590, running TurrisOS 6.0.4), replacing ISP ONU.
As others have reported ([in this forum](https://github.com/Anime4000/RTL960x#s...Hi there!
I bought ODI DFP-34X-2C2 module and managed it to work in my Turris Omnia (RTROM01-CE, SN 60129549590, running TurrisOS 6.0.4), replacing ISP ONU.
As others have reported ([in this forum](https://github.com/Anime4000/RTL960x#sucess-story)), I believe that 2500baseX mode should work transparently.
Perhaps, I can see in the logs that, after setting this mode in ODI side, it gets downgraded to 1000baseX mode.
SFP module log:
```
net_device_ops yet
<6>eth0: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
<6>eth0.2 (): not using net_device_ops yet
<6>eth0.2: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
<6>eth0.3 (): not using net_device_ops yet
<6>eth0.3: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
<6>nas0 (): not using net_device_ops yet
<6>nas0: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
<4>>>>> Set nas0 carrier off !!!
<6>pon0 (): not using net_device_ops yet
<6>pon0: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
<4>RTL8686 GMAC Probing..
<4>first entry: 0, portmask 127, rx: 802334ec
<4>nas0 -> 0x4
<4>Init RTK Driver Module....*** [RT_DBG] drivers/net/rtl86900/sdk/src//dal/rtl9602c/dal_rtl9602c_classify.c:3567: In function 'dal_rtl9602c_classify_unmatchAction_set' action 2
<4>
<4>OK
<4>Init RTK Core Dev Module....OK
<4>
<4> rtdrv_init !!! for netfilter
<4>pkt_redirect_init complete
<5>interrupt broadcaster init ok!
<4>u32 classifier
<4>nf_conntrack version 0.5.0 (479 buckets, 1916 max)
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<5>Bridge firewalling registered
<6>Ebtables v2.0 registered
<6>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
<6>All bugs added by David S. Miller <davem@redhat.com>
<4>Realtek GPIO Driver for Flash Reload Default
<5>physmap platform flash device: 0b000000 at 14000000
<4>Luna SPI NOR FLASH G3 driver-C22017/MMIO16-1 <5>master->name physmap-flash
<5>cmd: cmdlinepart
<5>14 cmdlinepart partitions found on MTD device physmap-flash
<5>Creating 14 MTD partitions on "physmap-flash":
<5>0x000000000000-0x000000040000 : "boot"
<5>0x000000040000-0x000000042000 : "env"
<5>0x000000042000-0x000000044000 : "env2"
<5>0x000000044000-0x000000080000 : "config"
<5>0x000000080000-0x0000001cc000 : "k0"
<5>0x0000001cc000-0x000000440000 : "r0"
<5>0x000000440000-0x00000058c000 : "k1"
<5>0x00000058c000-0x000000800000 : "r1"
<5>0x000000000000-0x000000001000 : "Partition_008"
<5>0x000000000000-0x000000001000 : "Partition_009"
<5>0x000000000000-0x000000001000 : "Partition_010"
<5>0x000000000000-0x000000001000 : "Partition_011"
<5>0x000000080000-0x0000001cc000 : "linux"
<5>0x0000001cc000-0x000000440000 : "rootfs"
<4>VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
<6>Freeing unused kernel memory: 100k freed
<4>re8670_open 3341
<4>omci platform attached!
<4>*** [RT_ERR] drivers/net/rtl86900/sdk/src//dal/rtl9602c/dal_rtl9602c_ponmac.c:1039: In function '_rtl9602c_ponMacGponModeV2_set'
<4> Error Code: 0x8848
<4>
<4>*** [RT_DBG] drivers/net/rtl86900/sdk/src//dal/rtl9602c/dal_rtl9602c_classify.c:3567: In function 'dal_rtl9602c_classify_unmatchAction_set' action 1
<4>
<4>*** [RT_DBG] drivers/net/rtl86900/sdk/src//dal/rtl9602c/dal_rtl9602c_classify.c:3567: In function 'dal_rtl9602c_classify_unmatchAction_set' action 1
<4>
<3>register_gpon_evt_state: register gpon event state Successfully !
<4>priority: 0, portmask 127, rx: 802334ec
<4>insert here, priority: 7, portmask 255, rx: c026b34c
<4>change mode to 4(HiSGMII PHY)
<4>send to user app (5) fail (-1)
<4>write watchdog_flag to 0x00000001
<4>[Kthread : watchdog ] init complete!
<4>************ Watchdog Setting ****************
<4>WDT_E=1, (1-enable, 0-disable)
<4>LX(MHz)=200
<4>WDT_CLK_SC=3
<4>PH1_TO=31
<4>PH2_TO=0
<4>WDT_RESET_MODE=0
<4>**********************************************
<4>port 2 assign to pon0
<4>pon0 -> 0x4
<6>device eth0 entered promiscuous mode
<4>priority: 7, portmask 255, rx: c026b34c
<4>priority: 0, portmask 127, rx: 802334ec
<4>insert here, priority: 4, portmask 4, rx: 80172968
<6>br0: port 1(eth0) entering learning state
<4>drivers/net/rtl86900/sdk/src/rtk/pon_led.c:1152 led sw blink init complete!
<6>br0: port 1(eth0) entering forwarding state
<4>drivers/net/rtl86900/sdk/src/module/lan_sds/lan_sds_main.c:679 SFP_TASK_MASK_EEPROM_128TO247
<4>change mode to 1(Fiber 1G)
<4>eth0: received packet with own address as source address 38-3a-21-27-eb-86 loop intf=0 0
<4>eth0: received packet with own address as source address 38-3a-21-27-eb-86 loop intf=0 0
```
Turris kernel log:
```
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.15.82 (packaging@turris.cz) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 8.4.0 r16803+125-784565b6a0) 8.4.0, GNU ld (GNU Binutils) 2.34) #0 SMP Sun Dec 11 23:19:41 2022
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Turris Omnia
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] percpu: Embedded 11 pages/cpu s14732 r8192 d22132 u45056
[ 0.000000] pcpu-alloc: s14732 r8192 d22132 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560
[ 0.000000] Kernel command line: earlyprintk rootwait console=ttyS0,115200 rootfstype=btrfs root=PARTUUID=00000000-01 rootflags=commit=5,subvol=@ rw cfg80211.freg=**
[ 0.000000] Bootloader command line not present
[ 0.000000] Unknown kernel command line parameters "earlyprintk mangled_fs=btrfs", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 2063496K/2097152K available (9216K kernel code, 669K rwdata, 2180K rodata, 1024K init, 258K bss, 33656K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] Registering MPIC SoC Error Interrupt Controller
[ 0.000000] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000001] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.000018] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns
[ 0.000036] Switching to timer-based delay loop, resolution 1ns
[ 0.000180] Ignoring duplicate/late registration of read_current_timer delay
[ 0.000187] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000374] Console: colour dummy device 80x30
[ 0.000404] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=8000000)
[ 0.000414] pid_max: default: 32768 minimum: 301
[ 0.000509] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.000519] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.000917] CPU: Testing write buffer coherency: ok
[ 0.000939] CPU0: Spectre v2: using BPIALL workaround
[ 0.001041] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001341] Setting up static identity map for 0x100000 - 0x100060
[ 0.001423] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.001511] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.001571] rcu: Hierarchical SRCU implementation.
[ 0.001646] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.001708] smp: Bringing up secondary CPUs ...
[ 0.001872] Booting CPU 1
[ 0.002015] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.002022] CPU1: Spectre v2: using BPIALL workaround
[ 0.002081] smp: Brought up 1 node, 2 CPUs
[ 0.002088] SMP: Total of 2 processors activated (3200.00 BogoMIPS).
[ 0.002093] CPU: All CPU(s) started in SVC mode.
[ 0.002453] devtmpfs: initialized
[ 0.004314] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.004366] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.004376] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.004451] pinctrl core: initialized pinctrl subsystem
[ 0.005001] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.005604] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.006058] thermal_sys: Registered thermal governor 'step_wise'
[ 0.006200] cpuidle: using governor ladder
[ 0.006290] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.006297] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.006421] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.006429] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.014955] cryptd: max_cpu_qlen set to 1000
[ 0.015753] raid6: skip pq benchmark and using algorithm neonx8
[ 0.015761] raid6: using neon recovery algorithm
[ 0.016028] SCSI subsystem initialized
[ 0.016108] libata version 3.00 loaded.
[ 0.016197] usbcore: registered new interface driver usbfs
[ 0.016218] usbcore: registered new interface driver hub
[ 0.016236] usbcore: registered new device driver usb
[ 0.016860] clocksource: Switched to clocksource arm_global_timer
[ 0.019111] NET: Registered PF_INET protocol family
[ 0.019224] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.019763] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.019783] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.019793] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.019833] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.019897] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.019946] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.019977] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.020118] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.020138] PCI: CLS 0 bytes, default 64
[ 0.020610] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 0.022525] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.024510] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.024517] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.024966] xor: measuring software checksum speed
[ 0.028802] arm4regs : 2598 MB/sec
[ 0.033729] 8regs : 1998 MB/sec
[ 0.038288] 32regs : 2160 MB/sec
[ 0.043502] neon : 1887 MB/sec
[ 0.043506] xor: using function: arm4regs (2598 MB/sec)
[ 0.043548] bounce: pool size: 64 pages
[ 0.043578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.044713] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.045254] debugfs: Directory 'f1018100.gpio' with parent 'regmap' already present!
[ 0.045567] debugfs: Directory 'f1018140.gpio' with parent 'regmap' already present!
[ 0.045892] mvebu-pcie soc:pcie: host bridge /soc/pcie ranges:
[ 0.045920] mvebu-pcie soc:pcie: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 0.045935] mvebu-pcie soc:pcie: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 0.045949] mvebu-pcie soc:pcie: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 0.045963] mvebu-pcie soc:pcie: MEM 0x00f1048000..0x00f1049fff -> 0x0000048000
[ 0.045987] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 0.046000] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 0.046012] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 0.046024] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 0.046036] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
[ 0.046048] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
[ 0.046060] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
[ 0.046069] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
[ 0.046167] mvebu-pcie soc:pcie: pcie0.0: Slot power limit 10.0W
[ 0.046223] mvebu-pcie soc:pcie: pcie1.0: Slot power limit 10.0W
[ 0.046274] mvebu-pcie soc:pcie: pcie2.0: Slot power limit 10.0W
[ 0.046823] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
[ 0.046835] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.046845] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 0.046880] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 0.046894] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 0.046902] pci_bus 0000:00: root bus resource [mem 0xf1048000-0xf1049fff] (bus address [0x00048000-0x00049fff])
[ 0.046908] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.046913] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 0.046988] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[ 0.047167] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[ 0.047309] pci 0000:00:03.0: [11ab:6820] type 01 class 0x060400
[ 0.048158] PCI: bus0: Fast back to back transfers disabled
[ 0.048166] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.048177] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.048186] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.049032] PCI: bus1: Fast back to back transfers enabled
[ 0.049039] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.049113] pci 0000:02:00.0: [14c3:7915] type 00 class 0x000280
[ 0.049135] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref]
[ 0.049150] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref]
[ 0.049163] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref]
[ 0.049235] pci 0000:02:00.0: supports D1 D2
[ 0.049241] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.050137] PCI: bus2: Fast back to back transfers disabled
[ 0.050145] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.050218] pci 0000:03:00.0: [168c:003c] type 00 class 0x028000
[ 0.050240] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.050267] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.050338] pci 0000:03:00.0: supports D1 D2
[ 0.051233] PCI: bus3: Fast back to back transfers disabled
[ 0.051240] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[ 0.051264] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe03fffff]
[ 0.051273] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe07fffff]
[ 0.051281] pci 0000:00:03.0: BAR 8: assigned [mem 0xe0800000-0xe0bfffff]
[ 0.051288] pci 0000:00:01.0: BAR 7: assigned [io 0x10000-0x10fff]
[ 0.051295] pci 0000:00:02.0: BAR 7: assigned [io 0x20000-0x20fff]
[ 0.051301] pci 0000:00:03.0: BAR 7: assigned [io 0x30000-0x30fff]
[ 0.051307] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.051313] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff]
[ 0.051325] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe03fffff]
[ 0.051338] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe04fffff 64bit pref]
[ 0.051351] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0500000-0xe0503fff 64bit pref]
[ 0.051363] pci 0000:02:00.0: BAR 4: assigned [mem 0xe0504000-0xe0504fff 64bit pref]
[ 0.051374] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.051380] pci 0000:00:02.0: bridge window [io 0x20000-0x20fff]
[ 0.051389] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe07fffff]
[ 0.051401] pci 0000:03:00.0: BAR 0: assigned [mem 0xe0800000-0xe09fffff 64bit]
[ 0.051412] pci 0000:03:00.0: BAR 6: assigned [mem 0xe0a00000-0xe0a0ffff pref]
[ 0.051419] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.051424] pci 0000:00:03.0: bridge window [io 0x30000-0x30fff]
[ 0.051433] pci 0000:00:03.0: bridge window [mem 0xe0800000-0xe0bfffff]
[ 0.051499] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[ 0.051569] pcieport 0000:00:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.051818] pcieport 0000:00:01.0: pciehp: Slot(1): Card present
[ 0.051875] pcieport 0000:00:02.0: enabling device (0140 -> 0143)
[ 0.051937] pcieport 0000:00:02.0: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.052349] pcieport 0000:00:03.0: enabling device (0140 -> 0143)
[ 0.052406] pcieport 0000:00:03.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.052978] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.066859] mvebu-pcie soc:pcie: pcie2.0: link up
[ 0.066881] mvebu-pcie soc:pcie: pcie1.0: link up
[ 0.107286] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.107425] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.167255] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.167535] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.168854] printk: console [ttyS0] disabled
[ 0.188949] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 30, base_baud = 15625000) is a 16550A
[ 1.472877] printk: console [ttyS0] enabled
[ 1.497557] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 31, base_baud = 15625000) is a 16550A
[ 1.508949] loop: module loaded
[ 1.512110] Loading iSCSI transport class v2.0-870.
[ 1.518135] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy regulator
[ 1.525803] ahci-mvebu f10a8000.sata: supply phy not found, using dummy regulator
[ 1.533349] ahci-mvebu f10a8000.sata: supply target not found, using dummy regulator
[ 1.541192] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 1.550276] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.559610] scsi host0: ahci-mvebu
[ 1.563306] scsi host1: ahci-mvebu
[ 1.566793] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 53
[ 1.574749] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 53
[ 1.583720] spi-nor spi0.0: found mx25l6405d, expected s25fl164k
[ 1.589777] spi-nor spi0.0: mx25l6405d (8192 Kbytes)
[ 1.594874] 2 fixed-partitions partitions found on MTD device spi0.0
[ 1.601268] Creating 2 MTD partitions on "spi0.0":
[ 1.606073] 0x000000000000-0x000000100000 : "U-Boot"
[ 1.611345] 0x000000100000-0x000000800000 : "Rescue system"
[ 1.618942] hwmon hwmon0: temp1_input not attached to any thermal zone
[ 1.625948] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.635007] mvneta f1070000.ethernet eth0: Using hardware mac address d8:58:d7:01:09:30
[ 1.644333] mvneta f1030000.ethernet eth1: Using hardware mac address d8:58:d7:01:09:2e
[ 1.653631] mvneta f1034000.ethernet eth2: Using hardware mac address d8:58:d7:01:09:2f
[ 1.661811] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.668371] ehci-pci: EHCI PCI platform driver
[ 1.672857] ehci-platform: EHCI generic platform driver
[ 1.678186] ehci-orion: EHCI orion driver
[ 1.682298] orion-ehci f1058000.usb: EHCI Host Controller
[ 1.687728] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 1.695363] orion-ehci f1058000.usb: irq 49, io mem 0xf1058000
[ 1.726864] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 1.733105] hub 1-0:1.0: USB hub found
[ 1.736904] hub 1-0:1.0: 1 port detected
[ 1.741260] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 1.746598] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[ 1.754174] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 1.763451] xhci-hcd f10f0000.usb3: irq 55, io mem 0xf10f0000
[ 1.769297] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 1.774627] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
[ 1.782174] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed
[ 1.788815] hub 2-0:1.0: USB hub found
[ 1.792590] hub 2-0:1.0: 1 port detected
[ 1.796659] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.804996] hub 3-0:1.0: USB hub found
[ 1.808780] hub 3-0:1.0: 1 port detected
[ 1.812907] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.818255] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
[ 1.825831] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 1.835106] xhci-hcd f10f8000.usb3: irq 56, io mem 0xf10f8000
[ 1.840937] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.846266] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
[ 1.853784] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[ 1.860397] hub 4-0:1.0: USB hub found
[ 1.864169] hub 4-0:1.0: 1 port detected
[ 1.868240] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.876550] hub 5-0:1.0: USB hub found
[ 1.880330] hub 5-0:1.0: 1 port detected
[ 1.884485] usbcore: registered new interface driver usb-storage
[ 1.891023] armada38x-rtc f10a3800.rtc: registered as rtc0
[ 1.896593] armada38x-rtc f10a3800.rtc: setting system clock to 2022-12-12T03:00:48 UTC (1670814048)
[ 1.905914] i2c_dev: i2c /dev entries driver
[ 1.912471] orion_wdt: Initial timeout 171 sec
[ 1.913058] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.917183] sdhci: Secure Digital Host Controller Interface driver
[ 1.928562] sdhci: Copyright(c) Pierre Ossman
[ 1.933038] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.939686] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 1.947366] NET: Registered PF_INET6 protocol family
[ 1.952968] Segment Routing with IPv6
[ 1.956661] In-situ OAM (IOAM) with IPv6
[ 1.960659] NET: Registered PF_PACKET protocol family
[ 1.965010] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[ 1.965758] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.986243] 8021q: 802.1Q VLAN Support v1.8
[ 1.990556] Registering SWP/SWPB emulation handler
[ 1.997608] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 2.101993] mmc0: new high speed MMC card at address 0001
[ 2.107763] mmcblk0: mmc0:0001 008G30 7.28 GiB
[ 2.113634] mmcblk0: p1
[ 2.116471] mmcblk0boot0: mmc0:0001 008G30 4.00 MiB
[ 2.121893] mmcblk0boot1: mmc0:0001 008G30 4.00 MiB
[ 2.127146] mmcblk0rpmb: mmc0:0001 008G30 4.00 MiB, chardev (247:0)
[ 2.966863] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.973130] ata1.00: ATA-9: GTA 256GB SSD, HCS1A25C, max UDMA/133
[ 2.979250] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32)
[ 2.986773] ata1.00: configured for UDMA/133
[ 2.991244] scsi 0:0:0:0: Direct-Access ATA GTA 256GB SSD A25C PQ: 0 ANSI: 5
[ 2.999803] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 3.007350] sd 0:0:0:0: [sda] Write Protect is off
[ 3.012155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.012190] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.022240] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.029345] squashfs: Unknown parameter 'commit'
[ 3.035028] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.042285] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 1th superblock
[ 3.050968] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.058220] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 2th superblock
[ 3.066898] BTRFS: device fsid ec715b08-b0a6-4fb2-aca1-07df948ffd7a devid 1 transid 2787793 /dev/root scanned by swapper/0 (1)
[ 3.079709] BTRFS info (device mmcblk0p1): disk space caching is enabled
[ 3.086432] BTRFS info (device mmcblk0p1): has skinny extents
[ 3.112892] BTRFS info (device mmcblk0p1): enabling ssd optimizations
[ 3.126232] VFS: Mounted root (btrfs filesystem) on device 0:14.
[ 3.133909] devtmpfs: mounted
[ 3.137325] Freeing unused kernel image (initmem) memory: 1024K
[ 3.177017] Run /sbin/init as init process
[ 3.181124] with arguments:
[ 3.181126] /sbin/init
[ 3.181128] earlyprintk
[ 3.181130] with environment:
[ 3.181132] HOME=/
[ 3.181134] TERM=linux
[ 3.181136] mangled_fs=btrfs
[ 3.219493] init: Console is alive
[ 3.222994] init: - watchdog -
[ 3.296885] pcieport 0000:00:01.0: pciehp: Slot(1): No link
[ 3.519262] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.534425] Key type encrypted registered
[ 3.541185] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 3.552150] ehci-fsl: Freescale EHCI Host controller driver
[ 3.559258] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.565862] ohci-platform: OHCI generic platform driver
[ 3.575434] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.582303] ohci-pci: OHCI PCI platform driver
[ 3.588666] usbcore: registered new interface driver uas
[ 3.594123] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.604194] init: - preinit -
[ 5.713755] mount_root: mounting /dev/root
[ 5.720128] mount_root: loading kmods from internal overlay
[ 5.738236] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 5.746152] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 6.414082] block: attempting to load /etc/config/fstab
[ 6.421879] block: extroot: not configured
[ 6.445681] urandom-seed: Seeding with /etc/urandom.seed
[ 6.808721] BTRFS: device label srv devid 1 transid 50797 /dev/sda scanned by btrfs (625)
[ 6.817026] BTRFS info: devid 1 device path /dev/root changed to /dev/mmcblk0p1 scanned by btrfs (625)
[ 6.828992] procd: - early -
[ 6.831911] procd: - watchdog -
[ 7.361619] procd: - watchdog -
[ 7.364984] procd: - ubus -
[ 7.374276] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.417240] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.423738] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.430898] procd: - init -
[ 7.795316] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.862901] Key type dns_resolver registered
[ 7.872624] RPC: Registered named UNIX socket transport module.
[ 7.878600] RPC: Registered udp transport module.
[ 7.883318] RPC: Registered tcp transport module.
[ 7.888036] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.901273] tun: Universal TUN/TAP device driver, 1.6
[ 7.912572] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 7.926561] mv88e6085 f1072004.mdio-mii:10: switch 0x1760 detected: Marvell 88E6176, revision 1
[ 8.079971] random: crng init done
[ 8.083395] random: 23 urandom warning(s) missed due to ratelimiting
[ 8.997155] mv88e6085 f1072004.mdio-mii:10: configuring for fixed/rgmii-id link mode
[ 9.007059] mv88e6085 f1072004.mdio-mii:10: configuring for fixed/rgmii-id link mode
[ 9.016454] mv88e6085 f1072004.mdio-mii:10: Link is Up - 1Gbps/Full - flow control off
[ 9.025365] mv88e6085 f1072004.mdio-mii:10: Link is Up - 1Gbps/Full - flow control off
[ 9.129145] mv88e6085 f1072004.mdio-mii:10 lan0 (uninitialized): PHY [mv88e6xxx-0:00] driver [Marvell 88E1540] (irq=79)
[ 9.240740] mv88e6085 f1072004.mdio-mii:10 lan1 (uninitialized): PHY [mv88e6xxx-0:01] driver [Marvell 88E1540] (irq=80)
[ 9.357204] mv88e6085 f1072004.mdio-mii:10 lan2 (uninitialized): PHY [mv88e6xxx-0:02] driver [Marvell 88E1540] (irq=81)
[ 9.476993] mv88e6085 f1072004.mdio-mii:10 lan3 (uninitialized): PHY [mv88e6xxx-0:03] driver [Marvell 88E1540] (irq=82)
[ 9.592029] mv88e6085 f1072004.mdio-mii:10 lan4 (uninitialized): PHY [mv88e6xxx-0:04] driver [Marvell 88E1540] (irq=83)
[ 9.608181] DSA: tree 0 setup
[ 9.623331] NFS: Registering the id_resolver key type
[ 9.628475] Key type id_resolver registered
[ 9.632676] Key type id_legacy registered
[ 9.686422] i2c i2c-0: Added multiplexed i2c bus 1
[ 9.691420] i2c i2c-0: Added multiplexed i2c bus 2
[ 9.696383] i2c i2c-0: Added multiplexed i2c bus 3
[ 9.701518] i2c i2c-0: Added multiplexed i2c bus 4
[ 9.706626] i2c i2c-0: Added multiplexed i2c bus 5
[ 9.715721] i2c i2c-0: Added multiplexed i2c bus 6
[ 9.720808] i2c i2c-0: Added multiplexed i2c bus 7
[ 9.726282] pca953x 8-0071: supply vcc not found, using dummy regulator
[ 9.733125] pca953x 8-0071: using no AI
[ 9.740823] i2c i2c-0: Added multiplexed i2c bus 8
[ 9.745658] pca954x 0-0070: registered 8 multiplexed busses for I2C mux pca9547
[ 9.754270] sfp sfp: Host maximum power 3.0W
[ 9.754886] GACT probability on
[ 9.762343] Mirror/redirect action on
[ 9.769931] u32 classifier
[ 9.772662] input device check on
[ 9.776341] Actions configured
[ 9.785039] fuse: init (API version 7.34)
[ 9.793212] at24 1-0054: supply vcc not found, using dummy regulator
[ 9.804318] at24 1-0054: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
[ 9.811902] Bridge firewalling registered
[ 9.821868] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
[ 9.829497] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
[ 9.855383] usbcore: registered new interface driver ums-alauda
[ 9.861840] usbcore: registered new interface driver ums-cypress
[ 9.868565] usbcore: registered new interface driver ums-datafab
[ 9.875109] usbcore: registered new interface driver ums-freecom
[ 9.881705] usbcore: registered new interface driver ums-isd200
[ 9.892342] usbcore: registered new interface driver ums-jumpshot
[ 9.899177] usbcore: registered new interface driver ums-karma
[ 9.905774] usbcore: registered new interface driver ums-sddr09
[ 9.912374] usbcore: registered new interface driver ums-sddr55
[ 9.919025] usbcore: registered new interface driver ums-usbat
[ 9.926107] usbcore: registered new interface driver usbserial_generic
[ 9.932719] usbserial: USB Serial support registered for generic
[ 9.954187] xt_time: kernel timezone is -0000
[ 9.989459] mt7915e 0000:02:00.0: enabling device (0140 -> 0142)
[ 10.098172] sfp sfp: module ODI DFP-34X-2C2 rev sn XPON22100614 dc 221009
[ 10.107541] mvneta f1034000.ethernet eth2: switched to inband/1000base-x link mode
[ 10.132855] mt7915e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20211222184017a
[ 10.132855]
[ 10.168508] mt7915e 0000:02:00.0: WM Firmware Version: ____000000, Build Time: 20211222184052
[ 10.196071] mt7915e 0000:02:00.0: WA Firmware Version: DEV_000000, Build Time: 20211222184111
[ 10.354933] PPP generic driver version 2.4.2
[ 10.360192] NET: Registered PF_PPPOX protocol family
[ 10.367669] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 10.375530] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 10.399272] ath10k_pci 0000:03:00.0: enabling device (0140 -> 0142)
[ 10.405758] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 10.660499] ath10k_pci 0000:03:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 10.669776] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 10.679409] ath10k_pci 0000:03:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
[ 10.736708] ath10k_pci 0000:03:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 11.876556] ath10k_pci 0000:03:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[ 11.998290] ath: EEPROM regdomain: 0x0
[ 11.998299] ath: EEPROM indicates default country code should be used
[ 11.998301] ath: doing EEPROM country->regdmn map search
[ 11.998305] ath: country maps to regdmn code: 0x3a
[ 11.998308] ath: Country alpha2 being used: US
[ 11.998311] ath: Regpair used: 0x3a
[ 15.657664] usbcore: registered new interface driver qcserial
[ 15.663462] usbserial: USB Serial support registered for Qualcomm USB modem
[ 15.676783] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 18.465949] mvneta f1030000.ethernet eth1: configuring for fixed/rgmii link mode
[ 18.474095] mvneta f1030000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 18.482206] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 18.489378] mv88e6085 f1072004.mdio-mii:10 lan0: configuring for phy/gmii link mode
[ 18.502497] br-lan: port 1(lan0) entered blocking state
[ 18.507784] br-lan: port 1(lan0) entered disabled state
[ 18.564099] device lan0 entered promiscuous mode
[ 18.568772] device eth1 entered promiscuous mode
[ 18.741017] mv88e6085 f1072004.mdio-mii:10 lan1: configuring for phy/gmii link mode
[ 18.796955] mv88e6085 f1072004.mdio-mii:10 lan0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 18.865008] br-lan: port 2(lan1) entered blocking state
[ 18.865927] mv88e6085 f1072004.mdio-mii:10 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 18.870263] br-lan: port 2(lan1) entered disabled state
[ 18.932264] device lan1 entered promiscuous mode
[ 19.150136] mv88e6085 f1072004.mdio-mii:10 lan2: configuring for phy/gmii link mode
[ 19.190118] br-lan: port 1(lan0) entered blocking state
[ 19.195376] br-lan: port 1(lan0) entered forwarding state
[ 19.217202] br-lan: port 2(lan1) entered blocking state
[ 19.222458] br-lan: port 2(lan1) entered forwarding state
[ 19.241487] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 19.266844] BTRFS info (device sda): disk space caching is enabled
[ 19.273071] BTRFS info (device sda): has skinny extents
[ 19.303442] BTRFS info (device sda): enabling ssd optimizations
[ 19.371538] br-lan: port 3(lan2) entered blocking state
[ 19.376790] br-lan: port 3(lan2) entered disabled state
[ 19.402155] mv88e6085 f1072004.mdio-mii:10 lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 19.983748] device lan2 entered promiscuous mode
[ 20.012570] br-lan: port 3(lan2) entered blocking state
[ 20.017843] br-lan: port 3(lan2) entered forwarding state
[ 20.026829] mv88e6085 f1072004.mdio-mii:10 lan3: configuring for phy/gmii link mode
[ 20.098417] br-lan: port 4(lan3) entered blocking state
[ 20.103680] br-lan: port 4(lan3) entered disabled state
[ 20.170789] device lan3 entered promiscuous mode
[ 20.202401] mv88e6085 f1072004.mdio-mii:10 lan4: configuring for phy/gmii link mode
[ 20.277152] br-lan: port 5(lan4) entered blocking state
[ 20.282411] br-lan: port 5(lan4) entered disabled state
[ 20.344113] device lan4 entered promiscuous mode
[ 20.383151] mvneta f1034000.ethernet eth2: configuring for inband/1000base-x link mode
[ 20.446951] mvneta f1034000.ethernet eth2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 20.455012] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 20.461525] IPv6: ADDRCONF(NETDEV_CHANGE): eth2.2000: link becomes ready
[ 27.350234] process '@/usr/bin/zerotier-one' started with executable stack
[ 29.470689] br-lan: port 6(vethIsxPBP) entered blocking state
[ 29.476468] br-lan: port 6(vethIsxPBP) entered disabled state
[ 29.482472] device vethIsxPBP entered promiscuous mode
[ 29.520713] eth0: renamed from veth1g5b7M
[ 29.558102] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.564552] IPv6: ADDRCONF(NETDEV_CHANGE): vethIsxPBP: link becomes ready
[ 29.571568] br-lan: port 6(vethIsxPBP) entered blocking state
[ 29.577361] br-lan: port 6(vethIsxPBP) entered forwarding state
[ 29.878858] br-lan: port 7(vethzdk0fh) entered blocking state
[ 29.884639] br-lan: port 7(vethzdk0fh) entered disabled state
[ 29.890634] device vethzdk0fh entered promiscuous mode
[ 29.937707] br-lan: port 7(vethzdk0fh) entered blocking state
[ 29.943490] br-lan: port 7(vethzdk0fh) entered forwarding state
[ 29.978309] eth0: renamed from veth7OaZlz
[ 30.050915] IPv6: ADDRCONF(NETDEV_CHANGE): vethzdk0fh: link becomes ready
[ 30.851636] pppoe-wan: renamed from ppp0
[ 43.826279] docker0: port 1(veth6250cc1) entered blocking state
[ 43.832290] docker0: port 1(veth6250cc1) entered disabled state
[ 43.838449] device veth6250cc1 entered promiscuous mode
[ 46.423556] eth0: renamed from veth4330730
[ 46.481672] IPv6: ADDRCONF(NETDEV_CHANGE): veth6250cc1: link becomes ready
[ 46.489874] docker0: port 1(veth6250cc1) entered blocking state
[ 46.495821] docker0: port 1(veth6250cc1) entered forwarding state
[ 46.529298] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[ 66.794991] TCP: request_sock_TCP: Possible SYN flooding on port 5000. Sending cookies. Check SNMP counters.
[ 94.469869] docker0: port 1(veth6250cc1) entered disabled state
[ 94.476427] veth4330730: renamed from eth0
[ 94.591912] docker0: port 1(veth6250cc1) entered disabled state
[ 94.600511] device veth6250cc1 left promiscuous mode
[ 94.605518] docker0: port 1(veth6250cc1) entered disabled state
[ 94.800585] docker0: port 1(veth23868d8) entered blocking state
[ 94.806562] docker0: port 1(veth23868d8) entered disabled state
[ 94.812777] device veth23868d8 entered promiscuous mode
[ 94.820955] docker0: port 1(veth23868d8) entered blocking state
[ 94.826942] docker0: port 1(veth23868d8) entered forwarding state
[ 95.553352] docker0: port 1(veth23868d8) entered disabled state
[ 95.703530] eth0: renamed from veth87afa25
[ 95.743873] IPv6: ADDRCONF(NETDEV_CHANGE): veth23868d8: link becomes ready
[ 95.750941] docker0: port 1(veth23868d8) entered blocking state
[ 95.756906] docker0: port 1(veth23868d8) entered forwarding state
[ 106.072583] TCP: request_sock_TCPv6: Possible SYN flooding on port 5000. Sending cookies. Check SNMP counters.
[ 3588.663946] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[44408.831180] br-lan: port 1(lan0) entered disabled state
[44408.837260] mv88e6085 f1072004.mdio-mii:10 lan0: Link is Down
[44434.230309] mv88e6085 f1072004.mdio-mii:10 lan0: Link is Up - 1Gbps/Full - flow control rx/tx
[44434.238937] br-lan: port 1(lan0) entered blocking state
[44434.244183] br-lan: port 1(lan0) entered forwarding state
[47703.771367] pppoe-wan: renamed from ppp0
[47738.040041] docker0: port 1(veth23868d8) entered disabled state
[47738.048085] veth87afa25: renamed from eth0
[47738.166507] docker0: port 1(veth23868d8) entered disabled state
[47738.175657] device veth23868d8 left promiscuous mode
[47738.180720] docker0: port 1(veth23868d8) entered disabled state
[47738.364785] docker0: port 1(vethfb1e356) entered blocking state
[47738.370793] docker0: port 1(vethfb1e356) entered disabled state
[47738.376993] device vethfb1e356 entered promiscuous mode
[47738.384386] docker0: port 1(vethfb1e356) entered blocking state
[47738.390374] docker0: port 1(vethfb1e356) entered forwarding state
[47739.065556] docker0: port 1(vethfb1e356) entered disabled state
[47739.326272] eth0: renamed from veth0a77a23
[47739.366345] IPv6: ADDRCONF(NETDEV_CHANGE): vethfb1e356: link becomes ready
[47739.373379] docker0: port 1(vethfb1e356) entered blocking state
[47739.379340] docker0: port 1(vethfb1e356) entered forwarding state
[86348.391702] mv88e6085 f1072004.mdio-mii:10 lan0: Link is Down
[86348.422739] br-lan: port 1(lan0) entered disabled state
[86365.861397] mv88e6085 f1072004.mdio-mii:10 lan0: Link is Up - 1Gbps/Full - flow control rx/tx
[86365.870014] br-lan: port 1(lan0) entered blocking state
[86365.875277] br-lan: port 1(lan0) entered forwarding state
```
I have done some tests, trying to figure out whats is happening, like:
- Flash modes 4, 5 and 6 in ONU side
- Force (via ethtool) 2500baseX mode
The commands and output I ran:
```
root@turris:~# ethtool -s eth2 autoneg off speed 2500 duplex full
Cannot set new settings: Invalid argument
not setting speed
not setting duplex
not setting autoneg
root@turris:~# ethtool -s eth2 autoneg off
Cannot set new settings: Invalid argument
not setting autoneg
root@turris:~# ethtool -s eth2 speed 2500 duplex half
Cannot advertise speed 2500 duplex full
root@turris:~# ethtool -s eth2 speed 2500
Cannot advertise speed 2500
```
Is there anything I can try doing for Turris to work in 2.5Gbps mode?https://gitlab.nic.cz/turris/os/build/-/issues/425[Kernel] [TOS 7.x] DVBSky T330 device with kmod-dvb-usb-dvbsky module causes ...2024-01-05T10:19:22+01:00Štěpán Henek[Kernel] [TOS 7.x] DVBSky T330 device with kmod-dvb-usb-dvbsky module causes kernel panic whenever the dongle is inserted / present at startupIt is present in current TOS 6.X as well. Tested on both omnia and mox.
The dongle is working normally on my local PC and was working in the older version of TOS 6.X.
I can borrow you the dongle if it is necessary.
```
[ 106.984551] u...It is present in current TOS 6.X as well. Tested on both omnia and mox.
The dongle is working normally on my local PC and was working in the older version of TOS 6.X.
I can borrow you the dongle if it is necessary.
```
[ 106.984551] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[ 107.394524] usb 2-1: dvb_usb_v2: found a 'DVBSky T330' in warm state
[ 107.401080] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 107.410445] dvbdev: DVB: registering new adapter (DVBSky T330)
[ 107.417501] usb 2-1: dvb_usb_v2: MAC address: 00:cc:10:a5:33:0c
[ 107.438110] i2c i2c-9: Added multiplexed i2c bus 10
[ 107.443036] si2168 9-0064: Silicon Labs Si2168-B40 successfully identified
[ 107.449946] si2168 9-0064: firmware version: B 4.0.2
[ 107.463455] 8<--- cut here ---
[ 107.466585] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[ 107.474724] pgd = d61e8870
[ 107.477440] [00000008] *pgd=00000000
[ 107.481043] Internal error: Oops: 5 [#1] SMP ARM
[ 107.485671] Modules linked in: ath9k ath9k_common qcserial pppoe ppp_async iptable_nat dvb_usb_dvbsky ath9k_hw ath10k_pci ath10k_core ath xt_state xt_nat xt_conntrack xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD xt_CT usb_wwan pppox ppp_gee
[ 107.485836] iptable_filter ipt_ECN ip_tables ebtables ebt_vlan ebt_stp ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_among ebt_802_3 dvb_core crc_ccitt compat br_netfilter at24 sch_tbf sch_ingress sch_htb sch_hfsc em_u32 l
[ 107.660709] CPU: 0 PID: 424 Comm: kworker/0:3 Not tainted 5.15.142 #0
[ 107.667168] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 107.673102] Workqueue: usb_hub_wq hub_event
[ 107.677304] PC is at dvb_module_release+0x10/0x24 [dvb_core]
[ 107.682997] LR is at dvbsky_frontend_detach+0x24/0x34 [dvb_usb_dvbsky]
[ 107.689543] pc : [<bf2622c4>] lr : [<bf3dd2d8>] psr: a0000013
[ 107.695824] sp : c1243b30 ip : 00000000 fp : 000005b8
[ 107.701060] r10: c400f218 r9 : fffffdc0 r8 : c400f240
[ 107.706295] r7 : fffffdc0 r6 : c400f000 r5 : c400f7d0 r4 : c4f04400
[ 107.712837] r3 : 00000000 r2 : 000005b8 r1 : 80080004 r0 : c4f04400
[ 107.719379] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 107.726532] Control: 10c5387d Table: 052b004a DAC: 00000051
[ 107.732289] Register r0 information: slab kmalloc-512 start c4f04400 pointer offset 0 size 512
[ 107.740932] Register r1 information: non-paged memory
[ 107.745996] Register r2 information: non-paged memory
[ 107.751058] Register r3 information: NULL pointer
[ 107.755772] Register r4 information: slab kmalloc-512 start c4f04400 pointer offset 0 size 512
[ 107.764410] Register r5 information: slab kmalloc-4k start c400f000 pointer offset 2000 size 4096
[ 107.773310] Register r6 information: slab kmalloc-4k start c400f000 pointer offset 0 size 4096
[ 107.781948] Register r7 information: non-paged memory
[ 107.787010] Register r8 information: slab kmalloc-4k start c400f000 pointer offset 576 size 4096
[ 107.795821] Register r9 information: non-paged memory
[ 107.800883] Register r10 information: slab kmalloc-4k start c400f000 pointer offset 536 size 4096
[ 107.809782] Register r11 information: non-paged memory
[ 107.814932] Register r12 information: NULL pointer
[ 107.819733] Process kworker/0:3 (pid: 424, stack limit = 0xc9f2e57a)
[ 107.826103] Stack: (0xc1243b30 to 0xc1244000)
[ 107.830469] 3b20: c3e62f00 bf3dd2d8 c400f7d0 bf49a2a8
[ 107.838668] 3b40: 00000000 c400f000 c400f7d0 ffffffed 00000000 00000000 fffffdc0 c400f000
[ 107.846866] 3b60: c400f2f8 bf49a5b0 bf3e03e8 00000000 00000000 00000000 c400f000 00000001
[ 107.855063] 3b80: c4f05400 bf49d3e0 bf49b4c0 bf49b5d0 00000000 00000000 c43210b0 d293dc98
[ 107.863261] 3ba0: c0cc1088 c4f05420 bf3df08c bf3e0038 c4f05400 c5697400 bf3e0000 ffffffed
[ 107.871458] 3bc0: c4f05650 c07a30bc c4f05420 00000000 bf3e0038 c4f05420 00000011 c0f99e9c
[ 107.879654] 3be0: 00000000 c06a8298 c0fe15ac bf3e0038 c0fe159c c06a8708 00000001 bf3e0038
[ 107.887851] 3c00: c1243c4c c4f05420 00000000 c06a8c6c 00000000 c1243c4c c06a8bd8 00000000
[ 107.896048] 3c20: 00000000 c06a63bc 00000000 c12bd76c c3f30c38 d293dc98 c4f05420 00000001
[ 107.904244] 3c40: c4f05464 c06a8a20 c5894400 c4f05420 00000001 d293dc98 c0f99d60 c4f05420
[ 107.912442] 3c60: c4f05420 c0f99ed4 c0f90870 c06a7450 c4f05420 00000000 c5697480 c06a4ccc
[ 107.920639] 3c80: c5601800 c5697400 c5601800 c4f05e00 00000007 0000017d eedd6ae0 c4f05e00
[ 107.928836] 3ca0: 00000008 d293dc98 00000008 c4f05400 c4f05650 c0c9a248 c5697480 c0c9a268
[ 107.937033] 3cc0: c4f05650 00000000 c4f05650 c07a1cb0 00000001 00000000 00000000 00000000
[ 107.945231] 3ce0: 00001388 d293dc98 c0cdd2d4 c5781c44 00000001 c101c000 c5697480 c5781c44
[ 107.953429] 3d00: c5697404 c4f0560c c0f99e9c c0f99ed4 c0f9a364 c07a054c c4f05600 00000001
[ 107.961626] 3d20: c5781c40 00000001 00000001 00000004 c4f0564c c0c9a210 c0cc1088 c5697400
[ 107.969822] 3d40: 00000001 c5697400 c5697480 00000011 c0f99d6c c11fbefc 00000000 c07ac830
[ 107.978019] 3d60: c5697480 c0f9a524 c5697400 c07a2464 c5697480 00000000 c0f9a524 c06a8298
[ 107.986217] 3d80: c0fe15ac c0f9a524 c0fe159c c06a8708 00000001 c0f9a524 c1243de4 c5697480
[ 107.994414] 3da0: 00000000 c06a8c6c 00000000 c1243de4 c06a8bd8 00000000 00000000 c06a63bc
[ 108.002610] 3dc0: 00000000 c12bd76c c12b86b8 d293dc98 c5697480 00000001 c56974c4 c06a8a20
[ 108.010807] 3de0: c5781bc0 c5697480 00000001 d293dc98 c0f99d60 c5697480 c5697480 c0f99ed4
[ 108.019005] 3e00: c0f90870 c06a7450 c5697480 00000000 c1ae2880 c06a4ccc c0f90398 c57818c6
[ 108.027202] 3e20: 0000003a c0f903c8 00000001 393831c8 3932313a c05a6600 a0000013 d293dc98
[ 108.035398] 3e40: 0000000c c5697400 c57818c0 c5697480 00000000 c1ae2800 00000001 c11fbefc
[ 108.043595] 3e60: 00000000 c0798fc8 c5697400 c0fe27f8 00000000 00000000 c1ae2800 00000001
[ 108.051792] 3e80: c11fbefc c079a3f0 00000000 00000001 00000000 00000000 000003e8 00000000
[ 108.059989] 3ea0: eedd45c0 c11fbe00 c11fbe85 c101c000 c11fbe34 c11fbe38 c11cbf34 c101c030
[ 108.068186] 3ec0: 00000001 c11cbe00 c1ae2800 c11fbe40 c569763c c1ae28c4 c11cbf34 c11fbc20
[ 108.076384] 3ee0: c1ae2800 c0f99e34 c11cbf34 00000064 00010101 c0e58ec0 00000000 c10cf690
[ 108.084582] 3f00: c1243f4c d293dc98 c4015db8 c11fbefc c194d700 eedd3ac0 eedd9500 00000000
[ 108.092779] 3f20: 00000000 eedd9505 c194d740 c0148290 c1242000 eedd3ac0 00000008 c194d700
[ 108.100976] 3f40: c194d718 eedd3ac0 00000008 eedd3ad8 c0f03d00 eedd3c80 c1242000 c014856c
[ 108.109173] 3f60: c0f0f2bc c0fa9db8 c1071ecc c195dd40 c109a700 c0148508 c194d700 c1242000
[ 108.117370] 3f80: c1071ecc c109a720 00000000 c014fd3c c195dd40 c014fbf4 00000000 00000000
[ 108.125567] 3fa0: 00000000 00000000 00000000 c0100134 00000000 00000000 00000000 00000000
[ 108.133764] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 108.141962] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 108.150172] [<bf2622c4>] (dvb_module_release [dvb_core]) from [<bf3dd2d8>] (dvbsky_frontend_detach+0x24/0x34 [dvb_usb_dvbsky])
[ 108.161631] [<bf3dd2d8>] (dvbsky_frontend_detach [dvb_usb_dvbsky]) from [<bf49a2a8>] (dvb_usb_data_complete_204+0x10c/0x138 [dvb_usb_v2])
[ 108.174021] [<bf49a2a8>] (dvb_usb_data_complete_204 [dvb_usb_v2]) from [<bf49a5b0>] (dvb_usbv2_probe+0x14c/0xb94 [dvb_usb_v2])
[ 108.185446] [<bf49a5b0>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c07a30bc>] (usb_probe_interface+0x98/0x1bc)
[ 108.195130] [<c07a30bc>] (usb_probe_interface) from [<c06a8298>] (really_probe.part.0+0x9c/0x324)
[ 108.204030] [<c06a8298>] (really_probe.part.0) from [<c06a8708>] (driver_probe_device+0x38/0x11c)
[ 108.212927] [<c06a8708>] (driver_probe_device) from [<c06a8c6c>] (__device_attach_driver+0x94/0x108)
[ 108.222084] [<c06a8c6c>] (__device_attach_driver) from [<c06a63bc>] (bus_for_each_drv+0x80/0xd0)
[ 108.230894] [<c06a63bc>] (bus_for_each_drv) from [<c06a8a20>] (__device_attach+0x10c/0x190)
[ 108.239268] [<c06a8a20>] (__device_attach) from [<c06a7450>] (bus_probe_device+0x84/0x8c)
[ 108.247469] [<c06a7450>] (bus_probe_device) from [<c06a4ccc>] (device_add+0x3a0/0x890)
[ 108.255407] [<c06a4ccc>] (device_add) from [<c07a1cb0>] (usb_set_configuration+0x470/0x880)
[ 108.263781] [<c07a1cb0>] (usb_set_configuration) from [<c07ac830>] (usb_generic_driver_probe+0x50/0x8c)
[ 108.273203] [<c07ac830>] (usb_generic_driver_probe) from [<c07a2464>] (usb_probe_device+0x28/0x80)
[ 108.282186] [<c07a2464>] (usb_probe_device) from [<c06a8298>] (really_probe.part.0+0x9c/0x324)
[ 108.290821] [<c06a8298>] (really_probe.part.0) from [<c06a8708>] (driver_probe_device+0x38/0x11c)
[ 108.299717] [<c06a8708>] (driver_probe_device) from [<c06a8c6c>] (__device_attach_driver+0x94/0x108)
[ 108.308876] [<c06a8c6c>] (__device_attach_driver) from [<c06a63bc>] (bus_for_each_drv+0x80/0xd0)
[ 108.317685] [<c06a63bc>] (bus_for_each_drv) from [<c06a8a20>] (__device_attach+0x10c/0x190)
[ 108.326059] [<c06a8a20>] (__device_attach) from [<c06a7450>] (bus_probe_device+0x84/0x8c)
[ 108.334258] [<c06a7450>] (bus_probe_device) from [<c06a4ccc>] (device_add+0x3a0/0x890)
[ 108.342197] [<c06a4ccc>] (device_add) from [<c0798fc8>] (usb_new_device+0x178/0x310)
[ 108.349963] [<c0798fc8>] (usb_new_device) from [<c079a3f0>] (hub_event+0xfec/0x13bc)
[ 108.357729] [<c079a3f0>] (hub_event) from [<c0148290>] (process_one_work+0x20c/0x484)
[ 108.365589] [<c0148290>] (process_one_work) from [<c014856c>] (worker_thread+0x64/0x5b0)
[ 108.373703] [<c014856c>] (worker_thread) from [<c014fd3c>] (kthread+0x148/0x164)
[ 108.381125] [<c014fd3c>] (kthread) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 108.388367] Exception stack(0xc1243fb0 to 0xc1243ff8)
[ 108.393430] 3fa0: 00000000 00000000 00000000 00000000
[ 108.401628] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 108.409825] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 108.416457] Code: e92d4010 e2504000 08bd8010 e5943058 (e5930008)
[ 108.422700] ---[ end trace f8567559f26cdd8c ]---
[ 108.427405] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 108.427418] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 108.427426] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 108.427440] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 108.427446] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 108.427453] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 108.427459] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 108.479251] Kernel panic - not syncing: Fatal exception
[ 108.484496] CPU1: stopping
[ 108.487212] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 5.15.142 #0
[ 108.494716] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 108.500651] [<c010e9b0>] (unwind_backtrace) from [<c010a69c>] (show_stack+0x10/0x14)
[ 108.508423] [<c010a69c>] (show_stack) from [<c05f3bbc>] (dump_stack_lvl+0x40/0x4c)
[ 108.516015] [<c05f3bbc>] (dump_stack_lvl) from [<c010cbc4>] (do_handle_IPI+0xf8/0x12c)
[ 108.523953] [<c010cbc4>] (do_handle_IPI) from [<c010cc10>] (ipi_handler+0x18/0x20)
[ 108.531542] [<c010cc10>] (ipi_handler) from [<c018484c>] (handle_percpu_devid_irq+0x78/0x13c)
[ 108.540091] [<c018484c>] (handle_percpu_devid_irq) from [<c017e760>] (handle_domain_irq+0x5c/0x78)
[ 108.549077] [<c017e760>] (handle_domain_irq) from [<c01012e4>] (gic_handle_irq+0x7c/0x90)
[ 108.557279] [<c01012e4>] (gic_handle_irq) from [<c0100b7c>] (__irq_svc+0x5c/0x78)
[ 108.564781] Exception stack(0xc1083f60 to 0xc1083fa8)
[ 108.569845] 3f60: 00077fa8 00000000 00000001 c0117c20 c1082000 c0f04f54 00000001 c0f04f98
[ 108.578042] 3f80: 00000000 c0e580a8 00000000 c1083fb8 c107c03c c1083fb0 c01076d0 c01076d4
[ 108.586238] 3fa0: 60000013 ffffffff
[ 108.589733] [<c0100b7c>] (__irq_svc) from [<c01076d4>] (arch_cpu_idle+0x38/0x3c)
[ 108.597152] [<c01076d4>] (arch_cpu_idle) from [<c015f540>] (do_idle+0x1ec/0x258)
[ 108.604573] [<c015f540>] (do_idle) from [<c015f8e0>] (cpu_startup_entry+0x18/0x1c)
[ 108.612164] [<c015f8e0>] (cpu_startup_entry) from [<00101770>] (0x101770)
[ 108.618976] Rebooting in 3 seconds..
```Marek BehunMarek Behun