Commit 8aecbf16 authored by Martin Mareš's avatar Martin Mareš

New example config.

parent c9763428
......@@ -2,61 +2,67 @@
* This is an example configuration file.
*/
# Yet another comment
# Yes, even shell-like comments work...
#log syslog { error };
# Configure logging
#log syslog { debug, trace, info, remote, warning, error, auth, fatal, bug };
#log stderr all;
#log "tmp" all;
# Override router ID
#router id 62.168.0.1;
# You can define your own symbols...
#define xyzzy = 120+10;
# Define a route filter...
filter test_filter {
if net ~ 10.0.0.0/16 then accept;
else reject;
}
#filter sink { reject; }
#filter okay { accept; }
# Define another routing table
#table testable;
debug protocols all;
#protocol rip MyRIP_test {
# preference xyzzy;
# debug all;
# port 1520;
# period 7;
# garbagetime 60;
# interface "*" { mode broadcast; };
# honour neighbour;
# passwords { password "ahoj" from 0 to 10;
# password "nazdar" from 10;
# }
# authentication none;
# import filter { print "importing"; accept; };
# export filter { print "exporting"; accept; };
#}
# Turn on global debugging of all protocols
#debug protocols all;
# The direct protocol automatically generates device routes to
# all network interfaces. Can exist in as many instances as you wish
# if you want to populate multiple routing tables with device routes.
protocol direct {
# disabled;
# interface "-eth*", "*";
# interface "-eth*", "*"; # Restrict network interfaces it works with
}
# This pseudo-protocol performs synchronization between BIRD's routing
# tables and the kernel. If your kernel supports multiple routing tables
# (as Linux 2.2.x does), you can run multiple instances of the kernel
# protocol and synchronize different kernel tables with different BIRD tables.
protocol kernel {
# disabled;
# learn; # Learn all routes from the kernel
# learn; # Learn all alien routes from the kernel
persist; # Don't remove routes on bird shutdown
scan time 20; # Scan kernel routing table every 20 seconds
# async off; # Netlink: Disable asynchronous events
# import none; # Default is import all
export all; # Default is export none
# kernel table 5; # Kernel table to synchronize with (default: main)
}
# This pseudo-protocol watches all interface up/down events.
protocol device {
scan time 10; # Scan interfaces every 10 seconds
}
# Static routes (again, there can be multiple instances, so that you
# can disable/enable various groups of static routes on the fly).
protocol static {
# disabled;
# table testable;
# disabled; # Disable by default
# table testable; # Connect to a non-default table
# preference 1000; # Default preference of routes
# debug { states, routes, filters, interfaces, events, packets };
# debug all;
# route 0.0.0.0/0 via 62.168.0.13;
# route 62.168.0.0/25 reject;
# route 10.0.0.0/8 reject;
......@@ -66,8 +72,68 @@ protocol static {
# route 10.2.0.0/24 via "arc0";
}
# Pipe protocol connects two routing tables... Beware of loops.
#protocol pipe {
# peer table testable;
# import all;
# export all;
# Define what routes do we export to this protocol / import from it.
# import all; # default is all
# export all; # default is none
# import none; # If you wish to disable imports
# import filter test_filter; # Use named filter
# import where source = RTS_DEVICE; # Use explicit filter
#}
# RIP aka Rest In Pieces...
#protocol rip MyRIP { # You can also use an explicit name
# preference xyzzy;
# debug all;
# port 1520;
# period 7;
# infinity 16;
# garbagetime 60;
# interface "*" { mode broadcast; };
# honor neighbor; # To whom do we agree to send the routing table
# honor always;
# honor never;
# passwords { password "ahoj" from 0 to 10;
# password "nazdar" from 10;
# }
# authentication none;
# import filter { print "importing"; accept; };
# export filter { print "exporting"; accept; };
#}
#protocol bgp {
# disabled;
# local as 65000;
# neighbor 62.168.0.130 as 5588;
# multihop 20 via 62.168.0.13;
# hold time 240;
# startup hold time 240;
# connect retry time 120;
# keepalive time 80; # defaults to hold time / 3
# start delay time 5; # How long do we wait before initial connect
# error wait time 60, 300;# Minimum and maximum time we wait after an error (when consecutive
# # errors occur, we increase the delay exponentially ...
# error forget time 300; # ... until this timeout expires)
# disable after error; # Disable the protocol automatically when an error occurs
# next hop self; # Disable next hop processing and always advertise our local address as nexthop
# path metric 1; # Prefer routes with shorter paths (like Cisco does)
# default bgp_med 0; # MED value we use for comparison when none is defined
# default bgp_local_pref 0; # The same for local preference
# source address 62.168.0.14; # What local address we use for the TCP connection
# export where source=RTS_STATIC;
# export filter {
# if source = RTS_STATIC then {
## bgp_community = -empty-; bgp_community = add(bgp_community,(65000,5678));
## bgp_origin = 0;
# bgp_community = -empty-; bgp_community.add((65000,5678));
## if (65000,5678) ~ bgp_community then
## bgp_community.add((0, 1));
# if bgp_path ~ / 65000 / then
# bgp_path.prepend(65000);
# accept;
# }
# reject;
# };
#}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment