Turris issueshttps://gitlab.nic.cz/groups/turris/-/issues2024-03-12T13:38:03+01:00https://gitlab.nic.cz/turris/os/updater-lists/-/issues/8[TOS 7.0.0][HBK] Updater execution failed: inconsistent: Package luci-app-tra...2024-03-12T13:38:03+01:00Sviatoslav Sydorenko[TOS 7.0.0][HBK] Updater execution failed: inconsistent: Package luci-app-transmission requires package transmission-daemon that is not availableI've started getting this specific error notification in my email 11 hours ago (19 Feb 2024 , 06:00, Prague time) and got a number of repeated messages since:
```console
Updater execution failed:
INFO:Target Turris OS: 7.0.0
line not fou...I've started getting this specific error notification in my email 11 hours ago (19 Feb 2024 , 06:00, Prague time) and got a number of repeated messages since:
```console
Updater execution failed:
INFO:Target Turris OS: 7.0.0
line not found
ERROR:
inconsistent: Package luci-app-transmission requires package transmission-daemon that is not available.
line not found
line not found
line not found
line not found
line not found
line not found
```
The previous updater notification was about a successful update about 6-7 hours before that:
```
Update notifications
====================
Changes performed by updater at 2024-02-18T22:22:20+00:00
• Installed package kmod-ath10k-ct version 5.15.148+2022-05-13-f808496f-1-147bb589b91b90f72db07f3eb029bf76
• Installed package ath10k-firmware-qca988x-ct-full-htt version 2020-11-08-1
• Installed package omnia-mcu-firmware version 3.4-1
• Installed package omnia-mcutool version 0.2-1
• Installed package firmware-updater version 1.1-5
• Removed package ath10k-firmware-qca988x version 20230804-1
• Removed package kmod-ath10k version 5.15.148+5.15.148-1-1-147bb589b91b90f72db07f3eb029bf76
```
The upgrade to Turris OS 7.0.0 was performed a few days ago.
I'm guessing this is similar to #6.Turris OS 7.0https://gitlab.nic.cz/turris/os/build/-/issues/427PPtP VPN seems broken2024-03-04T14:05:24+01:00Michal HruseckyPPtP VPN seems brokenhttps://forum.turris.cz/t/turris-os-7-0-is-in-rc/19755/20https://forum.turris.cz/t/turris-os-7-0-is-in-rc/19755/20Turris OS 7.0https://gitlab.nic.cz/turris/os/build/-/issues/429Firewall status in LuCI is empty2024-03-04T10:12:20+01:00Michal HruseckyFirewall status in LuCI is emptyAs reported on our forum, firewall statu in LuCI might be empty. This might be some mixup between iptables and nftables firewall, we need to check, but we need to reproduce first.
https://forum.turris.cz/t/turris-os-7-0-is-in-rc/19755/27As reported on our forum, firewall statu in LuCI might be empty. This might be some mixup between iptables and nftables firewall, we need to check, but we need to reproduce first.
https://forum.turris.cz/t/turris-os-7-0-is-in-rc/19755/27Turris OS 7.0Michal HruseckyMichal Hruseckyhttps://gitlab.nic.cz/turris/os/packages/-/issues/936DHCP server replies with secs field set to one2024-03-12T14:21:31+01:00Nick KossifidisDHCP server replies with secs field set to oneIs this an issue with DNSMasq ? The RFC is pretty clear about this...
![image](/uploads/ef46a69869c6ada92f9788a2edb14003/image.png)Is this an issue with DNSMasq ? The RFC is pretty clear about this...
![image](/uploads/ef46a69869c6ada92f9788a2edb14003/image.png)https://gitlab.nic.cz/turris/os/packages/-/issues/935unable to switch omnia2016 wan to sfp2024-03-12T14:27:14+01:00Marius Durbacaunable to switch omnia2016 wan to sfpAs already reported to support (case #1542462) I'm unable to switch omnia2016 wan to sfp
I've done the following:
```
cd /boot/
rm dtb
ln -s armada-385-turris-omnia-sfp.dtb dtb
reboot
```
But after reboot there is sfp only phy support ...As already reported to support (case #1542462) I'm unable to switch omnia2016 wan to sfp
I've done the following:
```
cd /boot/
rm dtb
ln -s armada-385-turris-omnia-sfp.dtb dtb
reboot
```
But after reboot there is sfp only phy support :
```
[ 1.799021] mvneta f1034000.ethernet eth2: Using device tree mac address <redacted-mac-address-here>
[ 18.167496] mvneta f1034000.ethernet eth2: PHY [f1072004.mdio-mii:01] driver [Marvell 88E1510] (irq=POLL)
[ 18.167700] mvneta f1034000.ethernet eth2: configuring for phy/sgmii link mode
```
also updated fw but the same result as above ^
```
root@turris:~# opkg install turris-nor-update
Package turris-nor-update (1.1.0-7) installed in root is up to date.
root@turris:~# nor-update
Verifying /dev/mtd0 against uboot ...
a3a04aa6143fe437e00b96fbcc8cd20f - /dev/mtd0
a3a04aa6143fe437e00b96fbcc8cd20f - uboot
root@turris:~# reboot
root@turris:~#
```
other reports on forum https://forum.turris.cz/t/g-fast-sfp-worked-in-tos-3-stopped-working-in-tos-5/16690https://gitlab.nic.cz/turris/mox-boot-builder/-/issues/5ESPRESSObin Ultra board being recognized as Armada 3720 DB2024-01-09T13:21:48+01:00Benjamin SchneiderESPRESSObin Ultra board being recognized as Armada 3720 DBHi, when I compile v2022.06.11 `get_board_name()` correctly returns ESPRESSObin Ultra, but when I compile master (aaffec49f833b26ba24171c941000a33066bd13d) it is returning Armada 3720 DB. Let me know if there is any other useful informat...Hi, when I compile v2022.06.11 `get_board_name()` correctly returns ESPRESSObin Ultra, but when I compile master (aaffec49f833b26ba24171c941000a33066bd13d) it is returning Armada 3720 DB. Let me know if there is any other useful information I can provide. Thanks!https://gitlab.nic.cz/turris/pyuci/-/issues/11Memory leak in pyuci?2024-01-09T13:22:27+01:00RamaMemory leak in pyuci?I have a distinct ever-growing-never-freed memory usage in the following simple python main; tracemalloc points to the anonymous uci.get.
On our host, firewall is the biggest (wc) config, but the leak is evident in smaller configurations...I have a distinct ever-growing-never-freed memory usage in the following simple python main; tracemalloc points to the anonymous uci.get.
On our host, firewall is the biggest (wc) config, but the leak is evident in smaller configurations too (though more slow).
Is this a known issue?
The machine is an ar300m-gl-inet sbc with custom image, compiled off openwrt 22.03.5.
If you are wondering whether tracemalloc could be the curlpit - I reproduced the "leak" without it, and added it later, as a measure of troubleshooting.
```
import time
import tracemalloc
import uci
tracemalloc.start()
def loop_memory_test() -> None:
iterations = 10000
one = 0
while one < iterations:
with uci.Uci() as _uci:
_ = _uci.get("firewall")
one += 1
snapshot = tracemalloc.take_snapshot()
top_stats = snapshot.statistics('lineno')
for stat in top_stats[:10]:
print(f"{stat=}")
if one % 100 == 0:
time.sleep(2)
tracemalloc.stop()
if __name__ == "__main__":
loop_memory_test()
```https://gitlab.nic.cz/turris/user-docs/-/issues/200SFP module unstable after TOS4 - VDSL Modem2024-01-09T13:20:39+01:00johnappletreeSFP module unstable after TOS4 - VDSL Modem[Copy paste from the forum:](https://forum.turris.cz/t/user-experience-allnet-all4781-vdsl2-sfp-switch-modul-mini-gbic-vdsl2/7062/105?u=johnappletree)
Whist the module performs on my IPS’s subscriber line generally stable after the swit...[Copy paste from the forum:](https://forum.turris.cz/t/user-experience-allnet-all4781-vdsl2-sfp-switch-modul-mini-gbic-vdsl2/7062/105?u=johnappletree)
Whist the module performs on my IPS’s subscriber line generally stable after the switch from TOS3.x to TOS4.x I noticed intermittent hiccups manifested in the logs
` sfp: module transmit fault indicated`
` sfp: module transmit fault recovered`
and sometimes also
` sfp: module persistently indicates fault, disabling`
Those messages are generated by SFP.C [1] (not available in TOS3.x with kernel 4.9.x) and are pertinent to the check routines implemented for state machine:
- checks signal status (asserted / dessarted) for RX_LOS and TX_FAULT
with
` sfp: module transmit fault indicated`
relating to the signal status of TX_FAULT (`tx-fault in hi IRQ`)
SFP.C tries to clear (recover) the fault fives times in total, pausing one second between each attempt and if successful (`tx-fault in lo IRQ`) prints
` sfp: module transmit fault recovered`
If the five attempts are however exhausted it prints
` sfp: module persistently indicates fault, disabling`
and as a result there is no WAN connectivity. Signal status detection is only attempted again if the interface is being restarted, else the link will remain a down state.
It is not clear why the module most of the times passes the check but other times intermittently fails. Potential reasons could be:
- Module hardware defect that was not exposed in TOS3.x (lacking the presence of SFP.C and related checks)
- Something chocking the I2C bus communication with the module and preventing a timely response (within 300 ms) on the TX_FAULT signal status from the module
- Some bug in the SFP.C code, though its developer is adamant that it is not the case but trusts that the module misbehaves instead
[1] https://github.com/torvalds/linux/blob/master/drivers/net/phy/sfp.chttps://gitlab.nic.cz/turris/reforis/reforis-storage/-/issues/17Standard storage plugin mount options don't work with lxc2023-11-01T15:09:09+01:00ssdnvvStandard storage plugin mount options don't work with lxcI've formatted and mounted my external SSD via reForis. Mount options are therefore
```
# mount | grep sda
/dev/sda on /srv type btrfs (rw,noatime,space_cache,subvolid=256,subvol=/@)
```
When trying to create an unprivileged container (f...I've formatted and mounted my external SSD via reForis. Mount options are therefore
```
# mount | grep sda
/dev/sda on /srv type btrfs (rw,noatime,space_cache,subvolid=256,subvol=/@)
```
When trying to create an unprivileged container (for prerequisites see here: https://forum.turris.cz/t/tos-6-4-1-summary-on-how-to-run-unprivileged-lxc-containers-04-08-2023/19203), `lxc-create` fails:
```
# lxc-create --name innen --bdev best --template download -- --dist Ubuntu --release 23.04 --arch armv7l
Downloading the image index
Downloading the rootfs
Downloading the metadata
The image cache is now ready
Unpacking the rootfs
tar: dev/console: Cannot mknod: Operation not permitted
tar: dev/full: Cannot mknod: Operation not permitted
tar: dev/null: Cannot mknod: Operation not permitted
tar: dev/ptmx: Cannot mknod: Operation not permitted
tar: dev/random: Cannot mknod: Operation not permitted
tar: dev/tty: Cannot mknod: Operation not permitted
tar: dev/urandom: Cannot mknod: Operation not permitted
tar: dev/zero: Cannot mknod: Operation not permitted
tar: Exiting with failure status due to previous errors
lxc-create: innen: lxccontainer.c: create_run_template: 1627 Failed to create container from template
lxc-create: innen: tools/lxc_create.c: main: 317 Failed to create container innen
```
Seems the standard mount options of storage plugin do not work together well with the lxc-create - which is crucial for Turris Omnia and for Turris Omnia Enterprise to function as advertised.https://gitlab.nic.cz/turris/rainbow-ng/-/issues/24Turris 1.x: brightness is decreased on every restart of rainbow2023-10-02T17:14:15+02:00Ondřej CaletkaTurris 1.x: brightness is decreased on every restart of rainbowOn Turris 1.X running 6.4.2 with rainbow version 0.1.4-1, when brightness is set to less than or equal to 223 (on the precise scale), weird things start to happen:
```
# rainbow brightness -p 223
# uci show rainbow
rainbow.all=led
rainb...On Turris 1.X running 6.4.2 with rainbow version 0.1.4-1, when brightness is set to less than or equal to 223 (on the precise scale), weird things start to happen:
```
# rainbow brightness -p 223
# uci show rainbow
rainbow.all=led
rainbow.all.brightness='064'
# rainbow reset -n
# uci show rainbow
rainbow.all=led
rainbow.all.brightness='004'
# rainbow reset -n
# uci show rainbow
rainbow.all=led
rainbow.all.brightness='000'
```
After the second restart, the LEDs are completely dark. When brightness is set up to more than 223, it will get stored as 255 and this value survives unlimited amount of restarts. But that is just too bright.https://gitlab.nic.cz/turris/reforis/reforis/-/issues/416can't set "Domain of DHCP clients in DNS" to anything beside 'lan'2023-08-16T10:31:02+02:00bugrasan nacan't set "Domain of DHCP clients in DNS" to anything beside 'lan'# Summary
This is an example bug report.
# Steps To Reproduce
1. login into reForis
2. navigate to *Network Settings* => *DNS*
3. enable *Enable DHCP clients in DNS*
4. change *Domain of DHCP clients in DNS* to anything else beside `lan...# Summary
This is an example bug report.
# Steps To Reproduce
1. login into reForis
2. navigate to *Network Settings* => *DNS*
3. enable *Enable DHCP clients in DNS*
4. change *Domain of DHCP clients in DNS* to anything else beside `lan`, e.g. `home.arpa`
5. then save
6. try to resolve a host that received an ip from DHCP, e.g. `myhost`
`host myhost` or `host myhost.home.arpa` both will fail.
7. change *Domain of DHCP clients in DNS* to `lan` back
8. then save
6. try to resolve a host that received an ip from DHCP, e.g. `myhost`
`host myhost` or `host myhost.lan` both will work.
# Expected Result
Should work.
this has been already reported a long time ago:
https://forum.turris.cz/t/turris-os-4-0-beta1-is-released/10107/101
# Actual Result
Doesn't work.
# Turris info
- device: turris omnia
- reforis version: 1.4.1
- turris os version: 6.3.3
- turris branch: HBS
- kernel version: 5.15.114https://gitlab.nic.cz/turris/os/packages/-/issues/912Nextcloud does not work after upgrade2024-03-12T14:39:13+01:00jozefbrissNextcloud does not work after upgradeInternal Server Error
The server encountered an internal error and was unable to complete your request.
Please contact the server administrator if this error reappears multiple times, please include the technical details below in your r...Internal Server Error
The server encountered an internal error and was unable to complete your request.
Please contact the server administrator if this error reappears multiple times, please include the technical details below in your report.
More details can be found in the server log.
-----
Most likely result of
News announcements
==================
🚀 New Features
• Syncthing and Transmission WebApps now use Turris Auth
• Enabled multiple speed optimizations on Turris Omnia and Turris MOX
🐛 Bug Fixes
• Fixed webfinger support in Nextcloud
📌 Updates
• Nextcloud updated to 24.0.8
...
Downgraded package mariadb-server-base from version 10.6.10-3 to version 10.4.26-3
...
Database server is not running. Trying to start it:
----
2023-03-07 23:49:54 0 [Note] mariadbd (mysqld 10.4.26-MariaDB) starting as process 21941 ...
2023-03-07 23:49:54 0 [Note] InnoDB: Using Linux native AIO
2023-03-07 23:49:54 0 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins
2023-03-07 23:49:54 0 [Note] InnoDB: Uses event mutexes
2023-03-07 23:49:54 0 [Note] InnoDB: Compressed tables use zlib 1.2.11
2023-03-07 23:49:54 0 [Note] InnoDB: Number of pools: 1
2023-03-07 23:49:54 0 [Note] InnoDB: Using generic crc32 instructions
2023-03-07 23:49:54 0 [Note] InnoDB: Initializing buffer pool, total size = 64M, instances = 1, chunk size = 64M
2023-03-07 23:49:54 0 [Note] InnoDB: Completed initialization of buffer pool
2023-03-07 23:49:54 0 [Note] InnoDB: If the mysqld execution user is authorized, page cleaner thread priority can be changed. See the man page of setpriority ().
2023-03-07 23:49:54 0 [ERROR] InnoDB: Unsupported redo log format. The redo log was created with MariaDB 10.6.10.
2023-03-07 23:49:54 0 [ERROR] InnoDB: Plugin initialization aborted with error Generic error
2023-03-07 23:49:55 0 [Note] InnoDB: Starting shutdown...
2023-03-07 23:49:56 0 [ERROR] Plugin 'InnoDB' init function returned error.
2023-03-07 23:49:56 0 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
mariadbd: Too many arguments (first extra is 'restart').
---https://gitlab.nic.cz/turris/os/build/-/issues/403Syncthing: Failed to create folder root directory mkdir /Sync: permission denied2023-02-24T13:50:39+01:00Michal VyskocilSyncthing: Failed to create folder root directory mkdir /Sync: permission deniedUpon login syncthing application warns about the folder root directory. I haven't find anything in UI to fix that and this error keeps appearing. As this is an installation on Turris, the default should be /srv/Sync with a proper permiss...Upon login syncthing application warns about the folder root directory. I haven't find anything in UI to fix that and this error keeps appearing. As this is an installation on Turris, the default should be /srv/Sync with a proper permissions.https://gitlab.nic.cz/turris/webapps/-/issues/22Syncthing now requires dual passwords2023-08-16T10:24:50+02:00Giuseppe PiscitelliSyncthing now requires dual passwordsNow that syncthing is integrated into Turris Auth two passwords are required to log in: one, that of reForis, the other of syncthing itself. You can also choose to leave the syncthing GUI without a username and password, but this leads t...Now that syncthing is integrated into Turris Auth two passwords are required to log in: one, that of reForis, the other of syncthing itself. You can also choose to leave the syncthing GUI without a username and password, but this leads to a permanent warning on the screen, prompting you to create a password.https://gitlab.nic.cz/turris/os/build/-/issues/3992.5 GBps mode not being advertised/recognized2024-01-23T21:00:44+01:00Elias Policena2.5 GBps mode not being advertised/recognizedHi there!
I bought ODI DFP-34X-2C2 module and managed it to work in my Turris Omnia (RTROM01-CE, SN 60129549590, running TurrisOS 6.0.4), replacing ISP ONU.
As others have reported ([in this forum](https://github.com/Anime4000/RTL960x#s...Hi there!
I bought ODI DFP-34X-2C2 module and managed it to work in my Turris Omnia (RTROM01-CE, SN 60129549590, running TurrisOS 6.0.4), replacing ISP ONU.
As others have reported ([in this forum](https://github.com/Anime4000/RTL960x#sucess-story)), I believe that 2500baseX mode should work transparently.
Perhaps, I can see in the logs that, after setting this mode in ODI side, it gets downgraded to 1000baseX mode.
SFP module log:
```
net_device_ops yet
<6>eth0: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
<6>eth0.2 (): not using net_device_ops yet
<6>eth0.2: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
<6>eth0.3 (): not using net_device_ops yet
<6>eth0.3: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
<6>nas0 (): not using net_device_ops yet
<6>nas0: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
<4>>>>> Set nas0 carrier off !!!
<6>pon0 (): not using net_device_ops yet
<6>pon0: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
<4>RTL8686 GMAC Probing..
<4>first entry: 0, portmask 127, rx: 802334ec
<4>nas0 -> 0x4
<4>Init RTK Driver Module....*** [RT_DBG] drivers/net/rtl86900/sdk/src//dal/rtl9602c/dal_rtl9602c_classify.c:3567: In function 'dal_rtl9602c_classify_unmatchAction_set' action 2
<4>
<4>OK
<4>Init RTK Core Dev Module....OK
<4>
<4> rtdrv_init !!! for netfilter
<4>pkt_redirect_init complete
<5>interrupt broadcaster init ok!
<4>u32 classifier
<4>nf_conntrack version 0.5.0 (479 buckets, 1916 max)
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<5>Bridge firewalling registered
<6>Ebtables v2.0 registered
<6>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
<6>All bugs added by David S. Miller <davem@redhat.com>
<4>Realtek GPIO Driver for Flash Reload Default
<5>physmap platform flash device: 0b000000 at 14000000
<4>Luna SPI NOR FLASH G3 driver-C22017/MMIO16-1 <5>master->name physmap-flash
<5>cmd: cmdlinepart
<5>14 cmdlinepart partitions found on MTD device physmap-flash
<5>Creating 14 MTD partitions on "physmap-flash":
<5>0x000000000000-0x000000040000 : "boot"
<5>0x000000040000-0x000000042000 : "env"
<5>0x000000042000-0x000000044000 : "env2"
<5>0x000000044000-0x000000080000 : "config"
<5>0x000000080000-0x0000001cc000 : "k0"
<5>0x0000001cc000-0x000000440000 : "r0"
<5>0x000000440000-0x00000058c000 : "k1"
<5>0x00000058c000-0x000000800000 : "r1"
<5>0x000000000000-0x000000001000 : "Partition_008"
<5>0x000000000000-0x000000001000 : "Partition_009"
<5>0x000000000000-0x000000001000 : "Partition_010"
<5>0x000000000000-0x000000001000 : "Partition_011"
<5>0x000000080000-0x0000001cc000 : "linux"
<5>0x0000001cc000-0x000000440000 : "rootfs"
<4>VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
<6>Freeing unused kernel memory: 100k freed
<4>re8670_open 3341
<4>omci platform attached!
<4>*** [RT_ERR] drivers/net/rtl86900/sdk/src//dal/rtl9602c/dal_rtl9602c_ponmac.c:1039: In function '_rtl9602c_ponMacGponModeV2_set'
<4> Error Code: 0x8848
<4>
<4>*** [RT_DBG] drivers/net/rtl86900/sdk/src//dal/rtl9602c/dal_rtl9602c_classify.c:3567: In function 'dal_rtl9602c_classify_unmatchAction_set' action 1
<4>
<4>*** [RT_DBG] drivers/net/rtl86900/sdk/src//dal/rtl9602c/dal_rtl9602c_classify.c:3567: In function 'dal_rtl9602c_classify_unmatchAction_set' action 1
<4>
<3>register_gpon_evt_state: register gpon event state Successfully !
<4>priority: 0, portmask 127, rx: 802334ec
<4>insert here, priority: 7, portmask 255, rx: c026b34c
<4>change mode to 4(HiSGMII PHY)
<4>send to user app (5) fail (-1)
<4>write watchdog_flag to 0x00000001
<4>[Kthread : watchdog ] init complete!
<4>************ Watchdog Setting ****************
<4>WDT_E=1, (1-enable, 0-disable)
<4>LX(MHz)=200
<4>WDT_CLK_SC=3
<4>PH1_TO=31
<4>PH2_TO=0
<4>WDT_RESET_MODE=0
<4>**********************************************
<4>port 2 assign to pon0
<4>pon0 -> 0x4
<6>device eth0 entered promiscuous mode
<4>priority: 7, portmask 255, rx: c026b34c
<4>priority: 0, portmask 127, rx: 802334ec
<4>insert here, priority: 4, portmask 4, rx: 80172968
<6>br0: port 1(eth0) entering learning state
<4>drivers/net/rtl86900/sdk/src/rtk/pon_led.c:1152 led sw blink init complete!
<6>br0: port 1(eth0) entering forwarding state
<4>drivers/net/rtl86900/sdk/src/module/lan_sds/lan_sds_main.c:679 SFP_TASK_MASK_EEPROM_128TO247
<4>change mode to 1(Fiber 1G)
<4>eth0: received packet with own address as source address 38-3a-21-27-eb-86 loop intf=0 0
<4>eth0: received packet with own address as source address 38-3a-21-27-eb-86 loop intf=0 0
```
Turris kernel log:
```
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.15.82 (packaging@turris.cz) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 8.4.0 r16803+125-784565b6a0) 8.4.0, GNU ld (GNU Binutils) 2.34) #0 SMP Sun Dec 11 23:19:41 2022
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Turris Omnia
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] percpu: Embedded 11 pages/cpu s14732 r8192 d22132 u45056
[ 0.000000] pcpu-alloc: s14732 r8192 d22132 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560
[ 0.000000] Kernel command line: earlyprintk rootwait console=ttyS0,115200 rootfstype=btrfs root=PARTUUID=00000000-01 rootflags=commit=5,subvol=@ rw cfg80211.freg=**
[ 0.000000] Bootloader command line not present
[ 0.000000] Unknown kernel command line parameters "earlyprintk mangled_fs=btrfs", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 2063496K/2097152K available (9216K kernel code, 669K rwdata, 2180K rodata, 1024K init, 258K bss, 33656K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] Registering MPIC SoC Error Interrupt Controller
[ 0.000000] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000001] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.000018] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns
[ 0.000036] Switching to timer-based delay loop, resolution 1ns
[ 0.000180] Ignoring duplicate/late registration of read_current_timer delay
[ 0.000187] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000374] Console: colour dummy device 80x30
[ 0.000404] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=8000000)
[ 0.000414] pid_max: default: 32768 minimum: 301
[ 0.000509] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.000519] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.000917] CPU: Testing write buffer coherency: ok
[ 0.000939] CPU0: Spectre v2: using BPIALL workaround
[ 0.001041] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001341] Setting up static identity map for 0x100000 - 0x100060
[ 0.001423] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.001511] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.001571] rcu: Hierarchical SRCU implementation.
[ 0.001646] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.001708] smp: Bringing up secondary CPUs ...
[ 0.001872] Booting CPU 1
[ 0.002015] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.002022] CPU1: Spectre v2: using BPIALL workaround
[ 0.002081] smp: Brought up 1 node, 2 CPUs
[ 0.002088] SMP: Total of 2 processors activated (3200.00 BogoMIPS).
[ 0.002093] CPU: All CPU(s) started in SVC mode.
[ 0.002453] devtmpfs: initialized
[ 0.004314] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.004366] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.004376] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.004451] pinctrl core: initialized pinctrl subsystem
[ 0.005001] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.005604] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.006058] thermal_sys: Registered thermal governor 'step_wise'
[ 0.006200] cpuidle: using governor ladder
[ 0.006290] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.006297] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.006421] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.006429] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.014955] cryptd: max_cpu_qlen set to 1000
[ 0.015753] raid6: skip pq benchmark and using algorithm neonx8
[ 0.015761] raid6: using neon recovery algorithm
[ 0.016028] SCSI subsystem initialized
[ 0.016108] libata version 3.00 loaded.
[ 0.016197] usbcore: registered new interface driver usbfs
[ 0.016218] usbcore: registered new interface driver hub
[ 0.016236] usbcore: registered new device driver usb
[ 0.016860] clocksource: Switched to clocksource arm_global_timer
[ 0.019111] NET: Registered PF_INET protocol family
[ 0.019224] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.019763] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.019783] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.019793] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.019833] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.019897] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.019946] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.019977] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.020118] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.020138] PCI: CLS 0 bytes, default 64
[ 0.020610] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 0.022525] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.024510] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.024517] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.024966] xor: measuring software checksum speed
[ 0.028802] arm4regs : 2598 MB/sec
[ 0.033729] 8regs : 1998 MB/sec
[ 0.038288] 32regs : 2160 MB/sec
[ 0.043502] neon : 1887 MB/sec
[ 0.043506] xor: using function: arm4regs (2598 MB/sec)
[ 0.043548] bounce: pool size: 64 pages
[ 0.043578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.044713] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.045254] debugfs: Directory 'f1018100.gpio' with parent 'regmap' already present!
[ 0.045567] debugfs: Directory 'f1018140.gpio' with parent 'regmap' already present!
[ 0.045892] mvebu-pcie soc:pcie: host bridge /soc/pcie ranges:
[ 0.045920] mvebu-pcie soc:pcie: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 0.045935] mvebu-pcie soc:pcie: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 0.045949] mvebu-pcie soc:pcie: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 0.045963] mvebu-pcie soc:pcie: MEM 0x00f1048000..0x00f1049fff -> 0x0000048000
[ 0.045987] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 0.046000] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 0.046012] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 0.046024] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 0.046036] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
[ 0.046048] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
[ 0.046060] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
[ 0.046069] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
[ 0.046167] mvebu-pcie soc:pcie: pcie0.0: Slot power limit 10.0W
[ 0.046223] mvebu-pcie soc:pcie: pcie1.0: Slot power limit 10.0W
[ 0.046274] mvebu-pcie soc:pcie: pcie2.0: Slot power limit 10.0W
[ 0.046823] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
[ 0.046835] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.046845] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 0.046880] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 0.046894] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 0.046902] pci_bus 0000:00: root bus resource [mem 0xf1048000-0xf1049fff] (bus address [0x00048000-0x00049fff])
[ 0.046908] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.046913] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 0.046988] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[ 0.047167] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[ 0.047309] pci 0000:00:03.0: [11ab:6820] type 01 class 0x060400
[ 0.048158] PCI: bus0: Fast back to back transfers disabled
[ 0.048166] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.048177] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.048186] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.049032] PCI: bus1: Fast back to back transfers enabled
[ 0.049039] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.049113] pci 0000:02:00.0: [14c3:7915] type 00 class 0x000280
[ 0.049135] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref]
[ 0.049150] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref]
[ 0.049163] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref]
[ 0.049235] pci 0000:02:00.0: supports D1 D2
[ 0.049241] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.050137] PCI: bus2: Fast back to back transfers disabled
[ 0.050145] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.050218] pci 0000:03:00.0: [168c:003c] type 00 class 0x028000
[ 0.050240] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.050267] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.050338] pci 0000:03:00.0: supports D1 D2
[ 0.051233] PCI: bus3: Fast back to back transfers disabled
[ 0.051240] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[ 0.051264] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe03fffff]
[ 0.051273] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe07fffff]
[ 0.051281] pci 0000:00:03.0: BAR 8: assigned [mem 0xe0800000-0xe0bfffff]
[ 0.051288] pci 0000:00:01.0: BAR 7: assigned [io 0x10000-0x10fff]
[ 0.051295] pci 0000:00:02.0: BAR 7: assigned [io 0x20000-0x20fff]
[ 0.051301] pci 0000:00:03.0: BAR 7: assigned [io 0x30000-0x30fff]
[ 0.051307] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.051313] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff]
[ 0.051325] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe03fffff]
[ 0.051338] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe04fffff 64bit pref]
[ 0.051351] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0500000-0xe0503fff 64bit pref]
[ 0.051363] pci 0000:02:00.0: BAR 4: assigned [mem 0xe0504000-0xe0504fff 64bit pref]
[ 0.051374] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.051380] pci 0000:00:02.0: bridge window [io 0x20000-0x20fff]
[ 0.051389] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe07fffff]
[ 0.051401] pci 0000:03:00.0: BAR 0: assigned [mem 0xe0800000-0xe09fffff 64bit]
[ 0.051412] pci 0000:03:00.0: BAR 6: assigned [mem 0xe0a00000-0xe0a0ffff pref]
[ 0.051419] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.051424] pci 0000:00:03.0: bridge window [io 0x30000-0x30fff]
[ 0.051433] pci 0000:00:03.0: bridge window [mem 0xe0800000-0xe0bfffff]
[ 0.051499] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[ 0.051569] pcieport 0000:00:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.051818] pcieport 0000:00:01.0: pciehp: Slot(1): Card present
[ 0.051875] pcieport 0000:00:02.0: enabling device (0140 -> 0143)
[ 0.051937] pcieport 0000:00:02.0: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.052349] pcieport 0000:00:03.0: enabling device (0140 -> 0143)
[ 0.052406] pcieport 0000:00:03.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.052978] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.066859] mvebu-pcie soc:pcie: pcie2.0: link up
[ 0.066881] mvebu-pcie soc:pcie: pcie1.0: link up
[ 0.107286] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.107425] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.167255] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.167535] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.168854] printk: console [ttyS0] disabled
[ 0.188949] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 30, base_baud = 15625000) is a 16550A
[ 1.472877] printk: console [ttyS0] enabled
[ 1.497557] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 31, base_baud = 15625000) is a 16550A
[ 1.508949] loop: module loaded
[ 1.512110] Loading iSCSI transport class v2.0-870.
[ 1.518135] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy regulator
[ 1.525803] ahci-mvebu f10a8000.sata: supply phy not found, using dummy regulator
[ 1.533349] ahci-mvebu f10a8000.sata: supply target not found, using dummy regulator
[ 1.541192] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 1.550276] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.559610] scsi host0: ahci-mvebu
[ 1.563306] scsi host1: ahci-mvebu
[ 1.566793] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 53
[ 1.574749] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 53
[ 1.583720] spi-nor spi0.0: found mx25l6405d, expected s25fl164k
[ 1.589777] spi-nor spi0.0: mx25l6405d (8192 Kbytes)
[ 1.594874] 2 fixed-partitions partitions found on MTD device spi0.0
[ 1.601268] Creating 2 MTD partitions on "spi0.0":
[ 1.606073] 0x000000000000-0x000000100000 : "U-Boot"
[ 1.611345] 0x000000100000-0x000000800000 : "Rescue system"
[ 1.618942] hwmon hwmon0: temp1_input not attached to any thermal zone
[ 1.625948] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.635007] mvneta f1070000.ethernet eth0: Using hardware mac address d8:58:d7:01:09:30
[ 1.644333] mvneta f1030000.ethernet eth1: Using hardware mac address d8:58:d7:01:09:2e
[ 1.653631] mvneta f1034000.ethernet eth2: Using hardware mac address d8:58:d7:01:09:2f
[ 1.661811] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.668371] ehci-pci: EHCI PCI platform driver
[ 1.672857] ehci-platform: EHCI generic platform driver
[ 1.678186] ehci-orion: EHCI orion driver
[ 1.682298] orion-ehci f1058000.usb: EHCI Host Controller
[ 1.687728] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 1.695363] orion-ehci f1058000.usb: irq 49, io mem 0xf1058000
[ 1.726864] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 1.733105] hub 1-0:1.0: USB hub found
[ 1.736904] hub 1-0:1.0: 1 port detected
[ 1.741260] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 1.746598] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[ 1.754174] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 1.763451] xhci-hcd f10f0000.usb3: irq 55, io mem 0xf10f0000
[ 1.769297] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 1.774627] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
[ 1.782174] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed
[ 1.788815] hub 2-0:1.0: USB hub found
[ 1.792590] hub 2-0:1.0: 1 port detected
[ 1.796659] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.804996] hub 3-0:1.0: USB hub found
[ 1.808780] hub 3-0:1.0: 1 port detected
[ 1.812907] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.818255] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
[ 1.825831] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 1.835106] xhci-hcd f10f8000.usb3: irq 56, io mem 0xf10f8000
[ 1.840937] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.846266] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
[ 1.853784] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[ 1.860397] hub 4-0:1.0: USB hub found
[ 1.864169] hub 4-0:1.0: 1 port detected
[ 1.868240] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.876550] hub 5-0:1.0: USB hub found
[ 1.880330] hub 5-0:1.0: 1 port detected
[ 1.884485] usbcore: registered new interface driver usb-storage
[ 1.891023] armada38x-rtc f10a3800.rtc: registered as rtc0
[ 1.896593] armada38x-rtc f10a3800.rtc: setting system clock to 2022-12-12T03:00:48 UTC (1670814048)
[ 1.905914] i2c_dev: i2c /dev entries driver
[ 1.912471] orion_wdt: Initial timeout 171 sec
[ 1.913058] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.917183] sdhci: Secure Digital Host Controller Interface driver
[ 1.928562] sdhci: Copyright(c) Pierre Ossman
[ 1.933038] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.939686] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 1.947366] NET: Registered PF_INET6 protocol family
[ 1.952968] Segment Routing with IPv6
[ 1.956661] In-situ OAM (IOAM) with IPv6
[ 1.960659] NET: Registered PF_PACKET protocol family
[ 1.965010] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[ 1.965758] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.986243] 8021q: 802.1Q VLAN Support v1.8
[ 1.990556] Registering SWP/SWPB emulation handler
[ 1.997608] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 2.101993] mmc0: new high speed MMC card at address 0001
[ 2.107763] mmcblk0: mmc0:0001 008G30 7.28 GiB
[ 2.113634] mmcblk0: p1
[ 2.116471] mmcblk0boot0: mmc0:0001 008G30 4.00 MiB
[ 2.121893] mmcblk0boot1: mmc0:0001 008G30 4.00 MiB
[ 2.127146] mmcblk0rpmb: mmc0:0001 008G30 4.00 MiB, chardev (247:0)
[ 2.966863] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.973130] ata1.00: ATA-9: GTA 256GB SSD, HCS1A25C, max UDMA/133
[ 2.979250] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32)
[ 2.986773] ata1.00: configured for UDMA/133
[ 2.991244] scsi 0:0:0:0: Direct-Access ATA GTA 256GB SSD A25C PQ: 0 ANSI: 5
[ 2.999803] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 3.007350] sd 0:0:0:0: [sda] Write Protect is off
[ 3.012155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.012190] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.022240] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.029345] squashfs: Unknown parameter 'commit'
[ 3.035028] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.042285] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 1th superblock
[ 3.050968] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.058220] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 2th superblock
[ 3.066898] BTRFS: device fsid ec715b08-b0a6-4fb2-aca1-07df948ffd7a devid 1 transid 2787793 /dev/root scanned by swapper/0 (1)
[ 3.079709] BTRFS info (device mmcblk0p1): disk space caching is enabled
[ 3.086432] BTRFS info (device mmcblk0p1): has skinny extents
[ 3.112892] BTRFS info (device mmcblk0p1): enabling ssd optimizations
[ 3.126232] VFS: Mounted root (btrfs filesystem) on device 0:14.
[ 3.133909] devtmpfs: mounted
[ 3.137325] Freeing unused kernel image (initmem) memory: 1024K
[ 3.177017] Run /sbin/init as init process
[ 3.181124] with arguments:
[ 3.181126] /sbin/init
[ 3.181128] earlyprintk
[ 3.181130] with environment:
[ 3.181132] HOME=/
[ 3.181134] TERM=linux
[ 3.181136] mangled_fs=btrfs
[ 3.219493] init: Console is alive
[ 3.222994] init: - watchdog -
[ 3.296885] pcieport 0000:00:01.0: pciehp: Slot(1): No link
[ 3.519262] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.534425] Key type encrypted registered
[ 3.541185] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 3.552150] ehci-fsl: Freescale EHCI Host controller driver
[ 3.559258] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.565862] ohci-platform: OHCI generic platform driver
[ 3.575434] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.582303] ohci-pci: OHCI PCI platform driver
[ 3.588666] usbcore: registered new interface driver uas
[ 3.594123] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.604194] init: - preinit -
[ 5.713755] mount_root: mounting /dev/root
[ 5.720128] mount_root: loading kmods from internal overlay
[ 5.738236] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 5.746152] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 6.414082] block: attempting to load /etc/config/fstab
[ 6.421879] block: extroot: not configured
[ 6.445681] urandom-seed: Seeding with /etc/urandom.seed
[ 6.808721] BTRFS: device label srv devid 1 transid 50797 /dev/sda scanned by btrfs (625)
[ 6.817026] BTRFS info: devid 1 device path /dev/root changed to /dev/mmcblk0p1 scanned by btrfs (625)
[ 6.828992] procd: - early -
[ 6.831911] procd: - watchdog -
[ 7.361619] procd: - watchdog -
[ 7.364984] procd: - ubus -
[ 7.374276] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.417240] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.423738] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.430898] procd: - init -
[ 7.795316] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.862901] Key type dns_resolver registered
[ 7.872624] RPC: Registered named UNIX socket transport module.
[ 7.878600] RPC: Registered udp transport module.
[ 7.883318] RPC: Registered tcp transport module.
[ 7.888036] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.901273] tun: Universal TUN/TAP device driver, 1.6
[ 7.912572] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 7.926561] mv88e6085 f1072004.mdio-mii:10: switch 0x1760 detected: Marvell 88E6176, revision 1
[ 8.079971] random: crng init done
[ 8.083395] random: 23 urandom warning(s) missed due to ratelimiting
[ 8.997155] mv88e6085 f1072004.mdio-mii:10: configuring for fixed/rgmii-id link mode
[ 9.007059] mv88e6085 f1072004.mdio-mii:10: configuring for fixed/rgmii-id link mode
[ 9.016454] mv88e6085 f1072004.mdio-mii:10: Link is Up - 1Gbps/Full - flow control off
[ 9.025365] mv88e6085 f1072004.mdio-mii:10: Link is Up - 1Gbps/Full - flow control off
[ 9.129145] mv88e6085 f1072004.mdio-mii:10 lan0 (uninitialized): PHY [mv88e6xxx-0:00] driver [Marvell 88E1540] (irq=79)
[ 9.240740] mv88e6085 f1072004.mdio-mii:10 lan1 (uninitialized): PHY [mv88e6xxx-0:01] driver [Marvell 88E1540] (irq=80)
[ 9.357204] mv88e6085 f1072004.mdio-mii:10 lan2 (uninitialized): PHY [mv88e6xxx-0:02] driver [Marvell 88E1540] (irq=81)
[ 9.476993] mv88e6085 f1072004.mdio-mii:10 lan3 (uninitialized): PHY [mv88e6xxx-0:03] driver [Marvell 88E1540] (irq=82)
[ 9.592029] mv88e6085 f1072004.mdio-mii:10 lan4 (uninitialized): PHY [mv88e6xxx-0:04] driver [Marvell 88E1540] (irq=83)
[ 9.608181] DSA: tree 0 setup
[ 9.623331] NFS: Registering the id_resolver key type
[ 9.628475] Key type id_resolver registered
[ 9.632676] Key type id_legacy registered
[ 9.686422] i2c i2c-0: Added multiplexed i2c bus 1
[ 9.691420] i2c i2c-0: Added multiplexed i2c bus 2
[ 9.696383] i2c i2c-0: Added multiplexed i2c bus 3
[ 9.701518] i2c i2c-0: Added multiplexed i2c bus 4
[ 9.706626] i2c i2c-0: Added multiplexed i2c bus 5
[ 9.715721] i2c i2c-0: Added multiplexed i2c bus 6
[ 9.720808] i2c i2c-0: Added multiplexed i2c bus 7
[ 9.726282] pca953x 8-0071: supply vcc not found, using dummy regulator
[ 9.733125] pca953x 8-0071: using no AI
[ 9.740823] i2c i2c-0: Added multiplexed i2c bus 8
[ 9.745658] pca954x 0-0070: registered 8 multiplexed busses for I2C mux pca9547
[ 9.754270] sfp sfp: Host maximum power 3.0W
[ 9.754886] GACT probability on
[ 9.762343] Mirror/redirect action on
[ 9.769931] u32 classifier
[ 9.772662] input device check on
[ 9.776341] Actions configured
[ 9.785039] fuse: init (API version 7.34)
[ 9.793212] at24 1-0054: supply vcc not found, using dummy regulator
[ 9.804318] at24 1-0054: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
[ 9.811902] Bridge firewalling registered
[ 9.821868] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
[ 9.829497] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
[ 9.855383] usbcore: registered new interface driver ums-alauda
[ 9.861840] usbcore: registered new interface driver ums-cypress
[ 9.868565] usbcore: registered new interface driver ums-datafab
[ 9.875109] usbcore: registered new interface driver ums-freecom
[ 9.881705] usbcore: registered new interface driver ums-isd200
[ 9.892342] usbcore: registered new interface driver ums-jumpshot
[ 9.899177] usbcore: registered new interface driver ums-karma
[ 9.905774] usbcore: registered new interface driver ums-sddr09
[ 9.912374] usbcore: registered new interface driver ums-sddr55
[ 9.919025] usbcore: registered new interface driver ums-usbat
[ 9.926107] usbcore: registered new interface driver usbserial_generic
[ 9.932719] usbserial: USB Serial support registered for generic
[ 9.954187] xt_time: kernel timezone is -0000
[ 9.989459] mt7915e 0000:02:00.0: enabling device (0140 -> 0142)
[ 10.098172] sfp sfp: module ODI DFP-34X-2C2 rev sn XPON22100614 dc 221009
[ 10.107541] mvneta f1034000.ethernet eth2: switched to inband/1000base-x link mode
[ 10.132855] mt7915e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20211222184017a
[ 10.132855]
[ 10.168508] mt7915e 0000:02:00.0: WM Firmware Version: ____000000, Build Time: 20211222184052
[ 10.196071] mt7915e 0000:02:00.0: WA Firmware Version: DEV_000000, Build Time: 20211222184111
[ 10.354933] PPP generic driver version 2.4.2
[ 10.360192] NET: Registered PF_PPPOX protocol family
[ 10.367669] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 10.375530] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 10.399272] ath10k_pci 0000:03:00.0: enabling device (0140 -> 0142)
[ 10.405758] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 10.660499] ath10k_pci 0000:03:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 10.669776] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 10.679409] ath10k_pci 0000:03:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
[ 10.736708] ath10k_pci 0000:03:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 11.876556] ath10k_pci 0000:03:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[ 11.998290] ath: EEPROM regdomain: 0x0
[ 11.998299] ath: EEPROM indicates default country code should be used
[ 11.998301] ath: doing EEPROM country->regdmn map search
[ 11.998305] ath: country maps to regdmn code: 0x3a
[ 11.998308] ath: Country alpha2 being used: US
[ 11.998311] ath: Regpair used: 0x3a
[ 15.657664] usbcore: registered new interface driver qcserial
[ 15.663462] usbserial: USB Serial support registered for Qualcomm USB modem
[ 15.676783] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 18.465949] mvneta f1030000.ethernet eth1: configuring for fixed/rgmii link mode
[ 18.474095] mvneta f1030000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 18.482206] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 18.489378] mv88e6085 f1072004.mdio-mii:10 lan0: configuring for phy/gmii link mode
[ 18.502497] br-lan: port 1(lan0) entered blocking state
[ 18.507784] br-lan: port 1(lan0) entered disabled state
[ 18.564099] device lan0 entered promiscuous mode
[ 18.568772] device eth1 entered promiscuous mode
[ 18.741017] mv88e6085 f1072004.mdio-mii:10 lan1: configuring for phy/gmii link mode
[ 18.796955] mv88e6085 f1072004.mdio-mii:10 lan0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 18.865008] br-lan: port 2(lan1) entered blocking state
[ 18.865927] mv88e6085 f1072004.mdio-mii:10 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 18.870263] br-lan: port 2(lan1) entered disabled state
[ 18.932264] device lan1 entered promiscuous mode
[ 19.150136] mv88e6085 f1072004.mdio-mii:10 lan2: configuring for phy/gmii link mode
[ 19.190118] br-lan: port 1(lan0) entered blocking state
[ 19.195376] br-lan: port 1(lan0) entered forwarding state
[ 19.217202] br-lan: port 2(lan1) entered blocking state
[ 19.222458] br-lan: port 2(lan1) entered forwarding state
[ 19.241487] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 19.266844] BTRFS info (device sda): disk space caching is enabled
[ 19.273071] BTRFS info (device sda): has skinny extents
[ 19.303442] BTRFS info (device sda): enabling ssd optimizations
[ 19.371538] br-lan: port 3(lan2) entered blocking state
[ 19.376790] br-lan: port 3(lan2) entered disabled state
[ 19.402155] mv88e6085 f1072004.mdio-mii:10 lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 19.983748] device lan2 entered promiscuous mode
[ 20.012570] br-lan: port 3(lan2) entered blocking state
[ 20.017843] br-lan: port 3(lan2) entered forwarding state
[ 20.026829] mv88e6085 f1072004.mdio-mii:10 lan3: configuring for phy/gmii link mode
[ 20.098417] br-lan: port 4(lan3) entered blocking state
[ 20.103680] br-lan: port 4(lan3) entered disabled state
[ 20.170789] device lan3 entered promiscuous mode
[ 20.202401] mv88e6085 f1072004.mdio-mii:10 lan4: configuring for phy/gmii link mode
[ 20.277152] br-lan: port 5(lan4) entered blocking state
[ 20.282411] br-lan: port 5(lan4) entered disabled state
[ 20.344113] device lan4 entered promiscuous mode
[ 20.383151] mvneta f1034000.ethernet eth2: configuring for inband/1000base-x link mode
[ 20.446951] mvneta f1034000.ethernet eth2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 20.455012] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 20.461525] IPv6: ADDRCONF(NETDEV_CHANGE): eth2.2000: link becomes ready
[ 27.350234] process '@/usr/bin/zerotier-one' started with executable stack
[ 29.470689] br-lan: port 6(vethIsxPBP) entered blocking state
[ 29.476468] br-lan: port 6(vethIsxPBP) entered disabled state
[ 29.482472] device vethIsxPBP entered promiscuous mode
[ 29.520713] eth0: renamed from veth1g5b7M
[ 29.558102] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.564552] IPv6: ADDRCONF(NETDEV_CHANGE): vethIsxPBP: link becomes ready
[ 29.571568] br-lan: port 6(vethIsxPBP) entered blocking state
[ 29.577361] br-lan: port 6(vethIsxPBP) entered forwarding state
[ 29.878858] br-lan: port 7(vethzdk0fh) entered blocking state
[ 29.884639] br-lan: port 7(vethzdk0fh) entered disabled state
[ 29.890634] device vethzdk0fh entered promiscuous mode
[ 29.937707] br-lan: port 7(vethzdk0fh) entered blocking state
[ 29.943490] br-lan: port 7(vethzdk0fh) entered forwarding state
[ 29.978309] eth0: renamed from veth7OaZlz
[ 30.050915] IPv6: ADDRCONF(NETDEV_CHANGE): vethzdk0fh: link becomes ready
[ 30.851636] pppoe-wan: renamed from ppp0
[ 43.826279] docker0: port 1(veth6250cc1) entered blocking state
[ 43.832290] docker0: port 1(veth6250cc1) entered disabled state
[ 43.838449] device veth6250cc1 entered promiscuous mode
[ 46.423556] eth0: renamed from veth4330730
[ 46.481672] IPv6: ADDRCONF(NETDEV_CHANGE): veth6250cc1: link becomes ready
[ 46.489874] docker0: port 1(veth6250cc1) entered blocking state
[ 46.495821] docker0: port 1(veth6250cc1) entered forwarding state
[ 46.529298] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[ 66.794991] TCP: request_sock_TCP: Possible SYN flooding on port 5000. Sending cookies. Check SNMP counters.
[ 94.469869] docker0: port 1(veth6250cc1) entered disabled state
[ 94.476427] veth4330730: renamed from eth0
[ 94.591912] docker0: port 1(veth6250cc1) entered disabled state
[ 94.600511] device veth6250cc1 left promiscuous mode
[ 94.605518] docker0: port 1(veth6250cc1) entered disabled state
[ 94.800585] docker0: port 1(veth23868d8) entered blocking state
[ 94.806562] docker0: port 1(veth23868d8) entered disabled state
[ 94.812777] device veth23868d8 entered promiscuous mode
[ 94.820955] docker0: port 1(veth23868d8) entered blocking state
[ 94.826942] docker0: port 1(veth23868d8) entered forwarding state
[ 95.553352] docker0: port 1(veth23868d8) entered disabled state
[ 95.703530] eth0: renamed from veth87afa25
[ 95.743873] IPv6: ADDRCONF(NETDEV_CHANGE): veth23868d8: link becomes ready
[ 95.750941] docker0: port 1(veth23868d8) entered blocking state
[ 95.756906] docker0: port 1(veth23868d8) entered forwarding state
[ 106.072583] TCP: request_sock_TCPv6: Possible SYN flooding on port 5000. Sending cookies. Check SNMP counters.
[ 3588.663946] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[44408.831180] br-lan: port 1(lan0) entered disabled state
[44408.837260] mv88e6085 f1072004.mdio-mii:10 lan0: Link is Down
[44434.230309] mv88e6085 f1072004.mdio-mii:10 lan0: Link is Up - 1Gbps/Full - flow control rx/tx
[44434.238937] br-lan: port 1(lan0) entered blocking state
[44434.244183] br-lan: port 1(lan0) entered forwarding state
[47703.771367] pppoe-wan: renamed from ppp0
[47738.040041] docker0: port 1(veth23868d8) entered disabled state
[47738.048085] veth87afa25: renamed from eth0
[47738.166507] docker0: port 1(veth23868d8) entered disabled state
[47738.175657] device veth23868d8 left promiscuous mode
[47738.180720] docker0: port 1(veth23868d8) entered disabled state
[47738.364785] docker0: port 1(vethfb1e356) entered blocking state
[47738.370793] docker0: port 1(vethfb1e356) entered disabled state
[47738.376993] device vethfb1e356 entered promiscuous mode
[47738.384386] docker0: port 1(vethfb1e356) entered blocking state
[47738.390374] docker0: port 1(vethfb1e356) entered forwarding state
[47739.065556] docker0: port 1(vethfb1e356) entered disabled state
[47739.326272] eth0: renamed from veth0a77a23
[47739.366345] IPv6: ADDRCONF(NETDEV_CHANGE): vethfb1e356: link becomes ready
[47739.373379] docker0: port 1(vethfb1e356) entered blocking state
[47739.379340] docker0: port 1(vethfb1e356) entered forwarding state
[86348.391702] mv88e6085 f1072004.mdio-mii:10 lan0: Link is Down
[86348.422739] br-lan: port 1(lan0) entered disabled state
[86365.861397] mv88e6085 f1072004.mdio-mii:10 lan0: Link is Up - 1Gbps/Full - flow control rx/tx
[86365.870014] br-lan: port 1(lan0) entered blocking state
[86365.875277] br-lan: port 1(lan0) entered forwarding state
```
I have done some tests, trying to figure out whats is happening, like:
- Flash modes 4, 5 and 6 in ONU side
- Force (via ethtool) 2500baseX mode
The commands and output I ran:
```
root@turris:~# ethtool -s eth2 autoneg off speed 2500 duplex full
Cannot set new settings: Invalid argument
not setting speed
not setting duplex
not setting autoneg
root@turris:~# ethtool -s eth2 autoneg off
Cannot set new settings: Invalid argument
not setting autoneg
root@turris:~# ethtool -s eth2 speed 2500 duplex half
Cannot advertise speed 2500 duplex full
root@turris:~# ethtool -s eth2 speed 2500
Cannot advertise speed 2500
```
Is there anything I can try doing for Turris to work in 2.5Gbps mode?https://gitlab.nic.cz/turris/os/packages/-/issues/891Nextcloud install sometimes fails with "Failed to connect to the database" error2022-12-19T11:41:19+01:00Michal VasilekNextcloud install sometimes fails with "Failed to connect to the database" errorSome users report having issues with setting up nextcloud with the following error message:
```
Error while trying to create admin user: Failed to connect to the database: An exception occurred in driver: SQLSTATE[HY000] [2002] No such f...Some users report having issues with setting up nextcloud with the following error message:
```
Error while trying to create admin user: Failed to connect to the database: An exception occurred in driver: SQLSTATE[HY000] [2002] No such file or directory
```
I was not able to reproduce this on an Omnia with Turris OS 6.1.0.
cc @sborekhttps://gitlab.nic.cz/turris/os/build/-/issues/397reForris and LuCI inacessible after upgrade2023-01-01T17:02:12+01:00Michal HavranekreForris and LuCI inacessible after upgradeI cannot access web interface after upgrade to 6.0.1. I tried to revert schnapps, but it happens again after autoupdate. After accessing router's IP on http in browser, page with topbar appears, but no login because of javascript error b...I cannot access web interface after upgrade to 6.0.1. I tried to revert schnapps, but it happens again after autoupdate. After accessing router's IP on http in browser, page with topbar appears, but no login because of javascript error because the web tried to access packages with https (on http page, which is forbidden and killed by browser). After going to https, certificate confirmation is shown by browser and after exception is confirmed, https://{IP}/cgi-bin/luci/ is opened with 404 page. If I try to open http again, I'm redirected to https where the 404 is present. I tried to wait to some fix, but it upgraded again with no luck. I'm unable to manage my router. It's Omnia 2.0, no special settings or changes to the system as far as I remember.https://gitlab.nic.cz/turris/os/build/-/issues/382RPCD crash2022-11-03T17:37:21+01:00Stepan RechnerRPCD crashIn ticket #1498457, the user reported, that LuCI fails to load with a `Session expired` error note. He managed to figure out that it crashes on a RPC call:
>>>
I have managed to discover that the following ubus call causes rpcd to crash...In ticket #1498457, the user reported, that LuCI fails to load with a `Session expired` error note. He managed to figure out that it crashes on a RPC call:
>>>
I have managed to discover that the following ubus call causes rpcd to crash (and subsequent timeout):
```
# ubus call luci-rpc getWirelessDevices
Command failed: Request timed out
The tail of strace from rpcd:
open("/var/run/hostapd-phy0.conf", O_RDONLY|O_LARGEFILE) = 9
read(9, "driver=nl80211\nlogger_syslog=127"..., 1024) = 1024
read(9, "key_retries=0\nwpa_key_mgmt=WPA-P"..., 1024) = 1024
read(9, "lan0-2\nctrl_interface=/var/run/h"..., 1024) = 726
read(9, "", 1024) = 0
close(9) = 0
socket(AF_UNIX, SOCK_DGRAM|SOCK_CLOEXEC, 0) = 9
ioctl(9, SIOCGIFINDEX, {ifr_name="wlan0", ifr_ifindex=27}) = 0
close(9) = 0
sendmsg(7, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=28, nlmsg_type=nl80211, nlmsg_flags=NLM_F_REQUEST|NLM_F_ACK, nlmsg_seq=1666818885, nlmsg_pid=27139}, "\x01\x00\x00\x00\x08\x00\x03\x00\x1b\x00\x00\x00"], iov_len=28}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 28
recvmsg(7, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=2248, nlmsg_type=nl80211, nlmsg_flags=0, nlmsg_seq=1666818885, nlmsg_pid=27139}, "\x03\x01\x00\x00\x08\x00\x01\x00\x00\x00\x00\x00\x09\x00\x02\x00\x70\x68\x79\x30\x00\x00\x00\x00\x08\x00\x2e\x00\x02\x00\x00\x00"...], iov_len=16384}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 2248
recvmsg(7, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=NLMSG_ERROR, nlmsg_flags=NLM_F_CAPPED, nlmsg_seq=1666818885, nlmsg_pid=27139}, {error=0, msg={nlmsg_len=28, nlmsg_type=nl80211, nlmsg_flags=NLM_F_REQUEST|NLM_F_ACK, nlmsg_seq=1666818885, nlmsg_pid=27139}}], iov_len=16384}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=NULL} ---
+++ killed by SIGSEGV +++
```
Not sure how to interpret this.
>>>https://gitlab.nic.cz/turris/os/packages/-/issues/878Forwarding to ISP servers doesn't work in Omnia after update to TOS 6.0.2022-10-30T01:00:55+02:00Martin PeckaForwarding to ISP servers doesn't work in Omnia after update to TOS 6.0.On Turris OS 5, I used DNS forwarding via kresd without issues. After update to 6.0, it doesn't work. I did not do anything custom with DNS on my router.
DNS settings in Reforis often time-out instead of applying what I set. In console,...On Turris OS 5, I used DNS forwarding via kresd without issues. After update to 6.0, it doesn't work. I did not do anything custom with DNS on my router.
DNS settings in Reforis often time-out instead of applying what I set. In console, I see this:
```
# after setting forward_upstream to 1
# /etc/init.d/resolver restart
Called /etc/init.d/kresd stop
set dhcp script
sh: invalid number ''
job 9 at Fri Oct 28 23:29:00 2022
Called /etc/init.d/kresd start
set dhcp script
Called /etc/resolver/dhcp_host_domain_ng.py
```
When I try to query the DNS server on the router after this, all requests time out.
With `forward_upstream` set to 0, restart of kresd works without the reported error and DNS resolution actually works.Martin PeckaMartin Peckahttps://gitlab.nic.cz/turris/os/build/-/issues/381IPv6 neighbor discovery breaks when igmp_snooping is enabled on the br-lan de...2023-06-19T08:35:35+02:00Mark BryarsIPv6 neighbor discovery breaks when igmp_snooping is enabled on the br-lan device.After the 6.0[.1] Upgrade, my IPv6 was partially broken, one host on my network worked, and hosts could talk to each other,
pings could reach the internet, but the replies didnt make it back.
I discovered ip -6 neigh showed lots of fail...After the 6.0[.1] Upgrade, my IPv6 was partially broken, one host on my network worked, and hosts could talk to each other,
pings could reach the internet, but the replies didnt make it back.
I discovered ip -6 neigh showed lots of failures resolving the hosts,
* tcpdump -eni br-lan icmp6 # showed it was sending neighbour solicitation but the device wasn't receiving them with a tcpdump there
* tcpdump -eni lan2 icmp6 # showed the icmp packets from the host that was pinging google, but not the solicitation packets I expected from above
Looking at my /etc/config/network I saw I had option igmp_snooping '1'
I tried setting this to 0 and IPv6 started working again.
I have a multicast feed from my ISP that i'd like to be able to use without flooding all of the ports, but this is more important.Turris OS 6.4.0